|
|
|
| USA, Canada, Mexico |
| REV 17/SEP/2018 |
|
|
|
|
|
|
| DMW Luminaires with 2 Lamps |
| NOTE: If no lamps are specified "LP-Option" these must be ordered separately. |
|
• | |
| FEATURES & SPECIFICATIONS |
|
| Intended Use |
| Intended for low to medium mounting heights where dust, dirt, humidity or moisture are present. |
| Ideal for canopies, dock areas, wastewater treatment, refrigerated areas, food processing and other non-hazardous environments. |
Certain airborne contaminants can diminish the integrity of acrylic and/or polycarbonate. External Weblink |
|
| Construction |
| Housing formed from impact resistant, UV stabilized, fiberglass reinforced polyester with cold-rolled steel enclosed wireway. |
| Poured in place gasketing provides a seal between housing and diffuser. |
| Captive, corrosion-resistant cam-action latches secure the diffuser; six on 4′ units, and ten on 8′ units. |
| Stainless steel latches available. |
| Finish: Painted parts pretreated with a five-stage iron-phosphate process to ensure superior paint adhesion and corrosion resistance, then finished with a high-gloss, baked white enamel. |
|
| Optics |
| High-impact acrylic diffuser with a stippled interior surface to spread lamp image. |
| PLEASE NOTE: The standard 4′ (1219.2mm) diffuser is 2-1/4" (57.2mm) deep, and the standard 8′ (2438.4mm) or 48T8HO diffuser is 3" (76.2mm) deep. To order the 4′ (1219.2mm) diffuser so that it matches the depth of the 8′ (2438.4mm) diffuser, order the ARDP option. The 8′ (2438.4mm) diffuser is not available in the 2-1/4" (57.2mm) depth. |
|
| Electrical |
| Thermally protected, resetting, Class P, HPF, non-PCB, UL Listed and CSA Certified ballast is standard. |
| AWM, TFN, THHN wire throughout, rated for required temperatures. |
|
| Installation |
| For unit or row installations, surface (ceiling or wall) or suspended mounting. |
| Wall mounting; horizontal orientation only for use in damp locations. |
| Stainless steel surface spring-mounting brackets standard (2 included). |
|
| Listings |
120V, 277V and MVOLT are
UL/cUL Listed (File E77235 Fluorescent Surface-mounted Luminaires)
and CSA Certified File 091995_S_000
Class 3422-01 (Gas-tube Liminaires)
Class 3435-02 (Emergency Lighting and Power Equipment). |
| 347V is CSA Certified (see Options). |
| NOM Certified (see Options). |
| Listed for 25°C ambient and wet locations for covered-ceiling applications. |
| IP65 rated. Optional IP67 rating available [supplied with 8 latches on 4′ (1219.2mm) units and 14 latches for 8′ (2438.4mm) units; covered ceiling not required]. |
| Compliance to FDA/USDA requirements and/or NSF splash-zone certification. |
|
| Manufacturer Warranty |
| 1-year limited warranty. Complete warranty terms located at: External Weblink |
|
| Note |
| Actual performance may differ as a result of end-user environment and application. |
| Specifications subject to change without notice. |
|
|
|
| Contact our sales office for configuration assistance and additional information. |
|
|
|
|
• | |
| ORDERING INFORMATION |
| Lead times will vary depending on options selected. Consult with your sales representative. |
|
| Example: DMW 2 32 MVOLT GEB10IS |
|
|
| Series |
DMW — Wet Location
For tandem double-length unit, add prefix T. Example: TDMW [1] |
|
|
| Number of lamps |
1, 2, 3 [2] |
|
|
| Lamp type |
28T5 — 28W T5 (48") [3]
32 — 32W T8 (48")
48T8HO — 44W T8HO (48")
54T5HO — 54W T5HO (48") [4]
96T8 — 59W T8 slimline (96")
96T8HO — 86W T8 380mA (96") |
|
|
| Diffuser |
"blank" — Standard 2-1/4" (57.2mm) Deep high-impact acrylic (50% DR)
ARDP — 3" (76.2mm) Deep high-impact acrylic (50% DR) [5] |
|
|
| Voltage |
120, 277, 347, MVOLT — others available |
|
|
| Ballast |
GEB10IS — Electronic ballast, ≤10% THD, instant start
GEB10RS — Electronic ballast, ≤10% THD, rapid start [6]
GEB10PS — Electronic ballasts, ≤10% THD, programmed rapid start
GEB10PS90 — T5HO 90° case temperature ballast |
|
|
| Options |
EL6DW — Emergency battery pack (nominal 600 lumens) [7][8][9]
EL14DW — Emergency battery pack (nominal 1400 lumens) [7][8][9]
GLR — Internal fast-blow fusing (not available with MVOLT or 347V) [10]
GMF — Internal slow-blow fusing (not available with MVOLT) [10]
RIF1 — Radio interference filter, one per fixture
STSL — Stainless steel latches
WLF — Wet location fittings (one pair; installed, top, for use with 1/2" rigid conduit)
IP67 — IP67 rated; requires 8 latches for 4′ fixtures and 14 latches for 8′ fixtures
CSA — CSA certified (only required for 347V)
NOM — NOM certified
CS89 — 6′ white cord, 16/3, no plug, wet location
CS88 — 6′ Brad Harrison 16/3 cord and straight blade plug set wet location [10]
MSI... — Wet location occupancy sensor pre-wired [10][11]
DL — Damp location [12] |
|
|
| |
|
|
|
Accessories: Order as separate catalog number. |
| BCD |
Bracket for hanger chain mounting. Two per package [13] |
|
|
| HC36 |
Chain hangers (1 pair, 36" long); Requires BCD |
|
|
|
Wet location fittings (1 pair, not installed, for use with 1/2" rigid conduit) |
|
|
Replacement Parts: Order as separate catalog number. |
|
2-1/4" Deep high-impact acrylic (50 DR) replacement lens for 48" fixture |
|
|
| DDM96 |
3" Deep high-impact acrylic (50% DR) replacement lens for 96" fixture [5] |
|
|
| DDM48ARDP |
3" Deep high-impact acrylic (50% DR) replacement lens for 48" fixture [5] |
|
|
| DMW/VRISMB |
Surface mounting brackets (pair) [14] |
|
|
| |
|
|
|
NOTES |
[1] Not available with 96T8 or 96T8HO.
[2] 32W T8 and 28 T5 lamps only.
[3] Must specify GEB10PS ballast.
[4] Must specify GEB10PS90 ballast.
[5] ARDP standard on 48T8HO and 8' fixtures.
[6] Available 347V T8 only.
[7] Must specify voltage; 120 or 277V only. |
[8] Not available to ship into California, does not meet CEC Title 20 compliance.
[9] See PS600DW or PS1400DW spec sheet for more information.
[10] Must specify voltage.
[11] For mounting up to 8' specify MS18; for mounting up to 20' specify MS120.
[12] DL option required for battery packs, sensors, and cord sets that are not wet location listed.
[13] For stainless steel, specify STS (ex: BCD STS).
[14] Brackets ship standard with fixture. For replacement purposes only. |
|
| | Catalog numbers in bold indicates active products in this group. Contact our sales office for the others. |
|
| Emergency Linear Fluorescent Battery Packs |
|
| Catalog Number |
Description |
|
|
Linear Fluorescent Battery Pack, Initial Lumens 600 to 700, Supports 1 or 2 Lamp(s), Dual-voltage input capability (120V or 277V), Emergency illumination time for 90 minutes, Nickel Cadmium Battery, UL Listed, Damp location listed, Meets UL 924, NFPA 101, NEC and OSHA Illumination standards |
|
| |
PS600DW spec sheet: External Weblink |
|
|
Linear Fluorescent Battery Pack, Initial Lumens 800 to 1500, Supports 1 or 2 Lamp(s), Dual-voltage input capability (120V or 277V), Emergency illumination time for 90 minutes, Nickel Cadmium Battery, UL Listed, Damp location listed, Meets UL 924, NFPA 101, NEC and OSHA Illumination standards |
|
| |
PS1400DW spec sheet: External Weblink |
|
| | Catalog numbers in bold indicates active products in this group. Contact our sales office for the others. |
|
|
|
• | |
|
| DMW Luminaires with 2 Lamps, Popular products |
| Catalog No. |
Description |
|
Stock |
|
Industrial Fluorescent Lighting Fixture, Model: DMW 2 32 120 GEB10RS NOM, 2x 32 Watt (F32T8 Lamps not included), Electronic Ballast 120 Volt AC (±10% THD) Rapid Start, Wet Location, IP65, Mexico NOM Labled |
|
3 |
|
Industrial Fluorescent Lighting Fixture, Model: DMW 2 32 MVOLT GEB10IS, 2x 32 Watt (F32T8 Lamps not included), Electronic Ballast 120V to 277V AC (±10% THD) Instant Start, Wet Location, IP65, UL, CSA |
|
10 |
|
Industrial Fluorescent Lighting Fixture, Model: DMW 2 32 MVOLT GEB10PS, 2x 32 Watt (F32T8 Lamps not included), Electronic Ballast 120V to 277V AC (±10% THD) Programmed Rapid Start, Wet Location, IP65, UL, CSA |
|
5 |
|
Industrial Fluorescent Lighting Fixture, Model: DMW 2 54T5HO MVOLT GEB10PS90, 2x 54 Watt (F54T5HO Lamps not included), 120V to 277V AC (T5HO 90° Case Temperature Ballast), Wet Location, IP65, UL, CSA |
|
1 |
|
Industrial Fluorescent Lighting Fixture, Model: DMW 2 54T5HO MVOLT GEB10PS90 LP841, 2x 54 Watt (two F54T5-841 Lamps included, 4100K), 120V to 277V AC (T5HO 90° Case Temperature Ballast), Wet Location, IP65, UL, CSA |
|
13 |
|
| Select desired product above to get further informations. Non stock products have a minimum order quantity. |
|
|
|
• | |
|
|
|
|
|
Specifications and information are nominal and are subject to change without notice.
For photometrics data contact our sales office. |
|
|
• | |
|
| Certain chemicals that may exist in end-user locations release airborne contaminants that can impact the integrity and safety of key fixture components that contain acrylic or polycarbonate material. Immediate damage may occur such as crazing, cracking, permeation losses and mechanical failure. Products with visually noticeable deterioration have diminished integrity and must be replaced immediately with a more suitable product for the application. |
|
| The following tables identify the most common chemicals and is not intended to be all-inclusive. Exposure to compounds identified as "Not Acceptable" will void all warranties associated with the product. Acrylic or polycarbonate components should not be used in areas where these chemicals are used and where these chemicals become mists or airborne vapors. Ensure that chemical interactions are considered when selecting fixtures. For additional information please consult an authorized factory representative. |
|
| The statements, technical information and recommendations obtained herein are believed to be accurate as of June 1, 2009. Since the conditions and methods of use of the product and of the information referred to herein are beyond our control, the manufacturer expressly disclaims any and all liability. NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The user should thoroughly test any application before commercialization. |
|
| Rating is based on visual appearance at ambient temperature 68°F (20°C), 50% humidity. Consult factory where applicable. |
|
|
|
|
|
|
|
|
|
|
|
| All technical information is believed to be accurate as of June 1, 2009. |
|
|
• | |
|
|
| | Accessories and Replacement parts |
| Product image |
Catalog No. and Description |
|
Stock |
|
Straight Liquidtight Cord Connector, Hub Size 1/2" NPT, Form 1, Zinc Plated Steel, Cable Range 0.125 to 0.250 inches (3.2 to 6.4)mm, Compliance c(UL)us, Suitable for Hazardous Locations |
|
11 |
|
Straight Liquidtight Cord Connector, Hub Size 1/2" NPT, Form 1, Zinc Plated Steel, Cable Range 0.250 to 0.375 inches (6.4 to 9.5)mm, Compliance c(UL)us, Suitable for Hazardous Locations |
|
180 |
|
Straight Liquidtight Cord Connector, Hub Size 1/2" NPT, Form 1, Zinc Plated Steel, Cable Range 0.375 to 0.425 inches (9.5 to 10.8)mm, Compliance c(UL)us, Suitable for Hazardous Locations |
|
98 |
|
Straight Liquidtight Cord Connector, Hub Size 1/2" NPT, Form 1, Zinc Plated Steel, Cable Range 0.425 to 0.500 inches (10.8 to 12.7)mm, Compliance c(UL)us, Suitable for Hazardous Locations |
|
49 |
|
Acrylic Diffuser for DMW... Nominal Length 4 Feet (1219mm), Replacement P/N 105169 |
|
4 |
|
Diffuser Fixing Clip, white, for Series DMW Lighting Fixtures |
|
78 |
|
Wet Location Fitting, 1 Pair (Set of two), not installed, for use with 1/2" Rigid Conduit |
|
34 |
|
Medium Base, Bi-Pin, Linear Fluorescent Lampholder, Low Profile, Slide-On, Turn-Type, Quick-Connect 18AWG Solid or Stranded Tinned, White |
|
|
|
ERSATZTEIL TRÄGERBLECH 2G13 WEISS REPLACEMENT LAMP HOLDER BRACKET FOR DMW232 (D2G13) |
|
14 |
|
| Select desired product above to get further informations. Non stock products have a minimum order quantity. |
|
|
|
|
|
|
| Fluorescent lamps and Related products |
|
• | |
|
| Fluorescent lamps, 28W T5 |
| Catalog No. |
Description |
|
Stock |
|
Linear Fluorescent High Efficiency T5 Lamp, 28 Watt, F28W/T5/840-841, Color Temperature 4100K, Miniature Bi-Pin (G5) Base, Nominal Length 45.2" (1148.0mm) |
|
19 |
|
Linear Fluorescent Lamp F28W/T5/841/ECO, 28W, 4199K, Initial Lumens 2900, Miniature Bi-Pin Base (G5), nom. Length 45.2" (1148.1mm), Case Qty. 40pcs |
|
7 |
|
| Select desired product above to get further informations. Non stock products have a minimum order quantity. |
|
|
|
• | |
|
| Fluorescent lamps, 32W T8 |
| Catalog No. |
Description |
|
Stock |
|
Linear Fluorescent Lamp, 32 Watt, Bulb T8 Ø 1" (25.4mm), Nominal Length 4 foot (1219.2mm), Medium Bi-Pin Base (G13), Lumens 2915 lm, Color Temperature 4100K (cool white), Model F32T8/XL/SPX41/HL/ECO |
|
45 |
|
LEUCHTRÖHRE FO32/741 32W, KEIN STARTER ERFORDERLICH, (1219.2xØ25.4)mm |
|
1 |
|
LEUCHTRÖHRE FO32/31K 32W, KEIN STARTER ERFORDERLICH, (1219.2xØ25.4)mm |
|
10 |
|
Fluorescent Lamp, OCTRON® 700 ECOLOGIC® Series, Type FO32/741/ECO, 32 Watts, Nomilal Length 48" (1219.2)mm, Medium Bi-Pin Base (G13), Bulb T8 (Ø 25.4mm), Initial Lumens 2800, Mean Lumens 2520, Color Temperature 4100 Kelvin, CRI 75 |
|
16 |
|
Linear Fluorescent Lamp F32T8/HL741/ALTO 30PK, 32W, T8 Bulb Ø 1" (25.4mm), Medium Bi-Pin Base (G13), Color Temperature 4100K (cool), Nominal Length 48" (1219.2mm), Initial Lumens 2850 Lm, CRI 85, Ref 927869784116 |
|
62 |
|
| Select desired product above to get further informations. Non stock products have a minimum order quantity. |
|
|
|
• | |
|
| Fluorescent lamps, 44W T8 (60W and 110W T12) |
| Catalog No. |
Description |
|
Stock |
|
Linear Fluoresxcent Lamp F48T12/CW/HO, 60W, 4100K (cool white), CRI 60, T12 Bulb HO (800mA) Rapid Start, Recessed Double Contact Base (R17d) |
|
125 |
|
LEUCHT RÖHRE F48T12/CW/VHO 110W, 4100K (COOL WHITE), SOCKEL R17d, LÄNGE 1219.2mm |
|
19 |
|
| Select desired product above to get further informations. Non stock products have a minimum order quantity. |
|
|
|
• | |
|
| Fluorescent lamps, 54W T5HO |
| Catalog No. |
Description |
|
Stock |
|
LEUCHT RÖHRE FP54/841/HO/ECO 54W, 4100K, MINIATURE BI-PIN (G5), T5, (1149.5xØ15.9)mm |
|
108 |
|
LEUCHT RÖHRE F54T5/841HO/ALTO 54W, 4100K, MINIATURE BI-PIN (G5), T5, (1149.5xØ15.9)mm |
|
7 |
|
Linear Fluorescent Lamp F54T5841HOECOCVG, 54W, 4100K, T5 Bulb, Miniature Bi-Pin (G5), Shatter-Resistant |
|
40 |
|
| Select desired product above to get further informations. Non stock products have a minimum order quantity. |
|
|
|
• | |
|
| Fluorescent lamps, 59W and 86W T8 2438.4 |
| |
|
|
| PLEASE NOTE |
Currently no active products found. (ECODE 900202)
Please contact our customer service. |
|
|
|
|
|
• | |
|
| Fluorescent lamps, 60W and 215W T12 |
| Catalog No. |
Description |
|
Stock |
|
Fluorescent Lamp F96T12/CW/WM, 60Watts, 4100K, Single Pin (Fa8), F96T12/CW/WM15PK |
|
14 |
|
Linear Fluorescent Lamp F96T12/CW/1500, 215Watt, 4100K, T12 Bulb, Recessed Double Contact (R17d) |
|
15 |
|
| Select desired product above to get further informations. Non stock products have a minimum order quantity. |
|
|
|
• | |
|
|
| | Related products |
| Product image |
Product group and Description |
|
|
Industrial Fluorescent Fixtures Series DMW (for 1 Lamp), 120Vac, 277Vac, 347Vac, Fiberglass Housing, Wet Location |
|
|
VT2 Industrial Vaportight Fluorescent Fixture, Fiberglass Housing, Interior & Exterior Applications |
|
|
Emergency Industrial Fluorescent Fixtures, 90 Minutes, Series DMW |
|
|
Harsh Environment Wet Light Utility fluorescent Fixture, EWL Series |
|
|
Industrial Wet Location Fluorescent Fixture, 120Vac to 277Vac 60Hz, c(UL)us Listed, IP65 rated, Designed for low to medium mounting heights, For use with two F32T8 or two F54T5HO lamps |
|
|
Dimmable Fluorescent Lighting Fixture Type DMW, Wet Location, IP65 rated |
|
|
LED Rough Service Fixtures, Ceiling/Suspended Mount, Wet Location, IP65, CSA Certified to UL and C-UL, VAP-LED Series |
|
|
Industrial Fluorescent Luminaire Series FEN, Wet & Damp Locations, 40°C Ambient Temperature, IP65 |
|
|
Industrial Fluorescent Luminaire Series FEM, Wet & Damp Locations, 40°C Ambient Temperature, IP65, NSf Splash Zone certified and/or meets FDA/USDA Guidelines |
|
|
Industrial Fluorescent Fixtures Series DMW (for 2 Lamps), 120Vac, 277Vac, 347Vac, Fiberglass Housing, Wet Location |
|
|
| Select desired product group above to get further informations. |
|
|
|
|
Specifications and information are nominal and are subject to change without notice.
