Description |
Model "M" SureShot® Sprayer, Black Anodized Finish, Nozzle #602, Adjustable From Extra Fine Mist To Pin Stream |
|
General Informations |
Sure Shot® sprayers are an inexpensive way to apply bulk chemicals like cleaners, degreasers, penetrating oils, solvents and lubricants. They use readily available compressed air, instead of flammable or dangerous propellants, and because they are reusable you don′t have to worry about disposal of empty cans. |
|
Model "M" Sprayers are one of the most Industrial line of sprayers. They feature metal construction, brass nozzles, and corrosion resistant working parts. Model "M" sprayers have a 24 oz. (0.71L) liquid capacity. Model "M" sprayers have an industrial anodized finish on both the interior and exterior. Model "M" sprayers work with oil and solvent based materials and can also be used with water based materials. Partial and complete repair kits are available, as well as all of the nozzles and extensions fit the Model "M" sprayers. |
|
For best results, the liquid to be sprayed should be lighter than a No. 10 motor oil. (If liquid is too heavy a pin stream will result). |
|
Specifications - Model "M" Sprayers |
Liquid capacity | Fill sprayer 2/3 full, 24 ounce (0.71L) maximum liquid capacity. |
Working pressure | The working pressure range is 80-150 P.S.I. (5.5 to 10.3 bar). |
Minimum pressure | At least 80 P.S.I. (5.5 bar) is needed to spray the full 24 Oz. (0.71L) without recharge of air. |
Maximum pressure | The maximum pressure should not exceed 200 P.S.I. (18.8 bar). |
|
Features - Model "M" Sprayers, Industrial Anodized Finish |
|
|
• | Pressurized by free air. |
|
• | All SureShot® sprayers have a maximum pressure of 200 P.S.I. (18.8 bar). |
|
• | SureShot® sprayers are not recommended for use with paints. |
|
• | Model "M" sprayers offer the same chemical resistant working parts as the Model "A" sprayers. |
|
• | They come standard with an adjustable nozzle and feature a chemical resistant anodized finish. |
|
• | Either Silver or Black Anodized finish. |
|
• | Model "M" sprayers will work with water, solvent and oil based materials. |
|
• | Model "M" sprayers use the same nozzles and extensions as the Model "A" sprayers. |
|
Specifications and information are nominal and are subject to change without notice.