USA, Canada |
Revised 05/21/2013 |
|
|
|
|
|
Catalog Number: ICN-2S54-90C-N |
|
|
• | Ballast Type: Electronic |
|
• | Starting Method: Programmed Start |
|
|
|
• | Input Frequency: 50/60 HZ |
|
• | Compliances: UL, CSA, RoHS |
|
|
Standard Lead Length: Black 24" (61cm), White 24" (61cm), Blue 27" (68.6cm), Red 27" (68.6cm), Yellow 47" (119.4cm) |
|
|
|
Electrical Specifications |
Lamp Type |
Num. of Lamps |
Rated Lamp Watts |
Min. Start Temp (°F/°C) |
Input Current (Amps) |
Input Power (ANSI Watts) |
Ballast Factor |
MAX THD % |
Power Factor |
MAX Lamp Current Crest Factor |
B.E.F. |
ICN-2S54-90C-N @ 120 Volts |
F54T5/HO |
1 |
54 |
-20/-29 |
0.55 |
66 |
1.12 |
10 |
0.98 |
1.7 |
1.70 |
F54T5/HO |
2 |
54 |
-20/-29 |
1.00 |
119 |
1.00 |
10 |
0.98 |
1.7 |
0.84 |
F54T5/HO/ES (44W) |
1 |
44 |
5/-15 |
0.44 |
53 |
1.00 |
10 |
0.98 |
1.7 |
1.89 |
F54T5/HO/ES (44W) |
2 |
44 |
5/-15 |
0.86 |
102 |
1.00 |
10 |
0.98 |
1.7 |
0.98 |
F54T5/HO/ES (49W) |
1 |
49 |
-20/-29 |
0.50 |
59 |
1.10 |
10 |
0.98 |
1.7 |
1.86 |
F54T5/HO/ES (49W) |
2 |
49 |
-20/-29 |
0.91 |
109 |
1.02 |
10 |
0.98 |
1.7 |
0.94 |
FT55W/2G11 |
1 |
55 |
-20/-29 |
0.49 |
00 |
0.92 |
10 |
0.96 |
1.7 |
|
FT55W/2G11 |
2 |
55 |
-20/-29 |
0.00 |
00 |
0.90 |
10 |
0.98 |
1.7 |
|
|
|
|
|
|
|
|
|
|
|
|
ICN-2S54-90C-N @ 277 Volts |
F54T5/HO |
1 |
54 |
-20/-29 |
0.25 |
66 |
1.12 |
15 |
0.98 |
1.7 |
1.70 |
F54T5/HO |
2 |
54 |
-20/-29 |
0.43 |
117 |
1.02 |
10 |
0.98 |
1.7 |
0.87 |
F54T5/HO/ES (44W) |
1 |
44 |
5/-15 |
0.20 |
53 |
1.00 |
10 |
0.98 |
1.7 |
1.89 |
F54T5/HO/ES (44W) |
2 |
44 |
5/-15 |
0.37 |
101 |
1.00 |
10 |
0.98 |
1.7 |
0.99 |
F54T5/HO/ES (49W) |
1 |
49 |
-20/-29 |
0.22 |
59 |
1.10 |
15 |
0.98 |
1.7 |
1.86 |
F54T5/HO/ES (49W) |
2 |
49 |
-20/-29 |
0.40 |
108 |
1.02 |
10 |
0.98 |
1.7 |
0.94 |
FT55W/2G11 |
1 |
55 |
-20/-29 |
0.22 |
58 |
0.92 |
10 |
0.96 |
1.7 |
1.59 |
FT55W/2G11 |
2 |
55 |
-20/-29 |
0.41 |
00 |
0.90 |
10 |
0.98 |
1.7 |
|
|
|
|
Notes: |
|
Section I - Physical Characteristics |
1.1 Ballast shall be physically interchangeable with standard electromagnetic or standard electronic ballasts, where applicable. |
1.2 Ballast shall be provided with integral leads or poke-in wire trap connectors color-coded per ANSI C82.11. |
|
Section II - Performance |
2.1 Ballast shall be Programmed Start. |
2.2 Ballast shall contain auto restart circuitry in order to restart lamps without resetting power. |
2.3 Ballast shall operate from 50/60 Hz input source of _____________ (120V through 277V, 347V or 347V through 480V) with sustained variations of +/- 10% (voltage and frequency). |
2.4 Ballast shall be high frequency electronic type and operate lamps at a frequency above 42 kHz to avoid interference with infrared devices and eliminate visible flicker. |
2.5 Ballast shall have a Power Factor greater than 0.98 for primary lamp. |
2.6 Ballast shall have a minimum ballast factor of 1.0 for primary lamp application. |
2.7 Ballast shall provide for a Lamp Current Crest Factor of 1.7 or less. |
2.8 Ballast input current shall have Total Harmonic Distortion (THD) of less than 10% when operated at nominal line voltage with primary lamp. |
2.9 Ballast shall have a Class A sound rating. |
2.10 Ballast shall have a minimum starting temperature of _______ {-18°C (0°F) or -29°C (-20°F)} for primary lamp. Consult lamp manufacturer for temperature versus light output characteristics. |
2.11 Ballast shall provide Lamp EOL Protection Circuit. |
2.12 Ballast shall tolerate sustained open circuit and short circuit output conditions. |
2.13 Four-lamp ballast shall have (semi-independent or independent) lamp operation. |
|
Section III - Regulatory |
3.1 Ballast shall not contain any Polychlorinated Biphenyl (PCB). |
3.2 Ballast shall be Underwriters Laboratories (UL) listed, Class P and Type 1 Outdoor; and Canadian Standards Association (CSA) certified where applicable. |
3.3 Ballast shall comply with ANSI C62.41 Category A for Transient protection. |
3.4 Ballast shall comply with ANSI C82.11 where applicable. |
3.5 Ballast shall comply with applicable requirements of the Federal Communications Commission (FCC) rules and regulations, Title 47 CFR part 18, for Non-Consumer equipment. |
3.6 Ballast shall comply with UL Type CC rating. |
3.7 Ballast shall comply with NEMA 410 for in-rush current limits. |
|
Section IV - Other |
4.1 Ballast shall be manufactured in a factory certified to ISO 9001 Quality System Standards. |
4.2 Ballast shall carry a five-year warranty from date of manufacture against defects in material or workmanship, including replacement, for operation at a maximum case temperature of 70°C. Ballasts with a "90°C" designation in their catalog number shall also carry a three-year warranty at a maximum case temperature of 90°C. |
4.3 Manufacturer shall have a twenty-year history of producing electronic ballasts for the North American market. |
|
|
|
Data is based upon tests performed by Philips Lighting Electronic N.A. in a controlled environment and representative of relative performance. Actual performance can vary depending on operating conditions. Specifications are subject to change without notice. All specifications are nominal unless otherwise noted. |
|
|
|
Specifications and information are nominal and are subject to change without notice.