Informations for reference only. – For further informations, please contact our sales office. Corresponding to your previous selections, the list only shows a summary of selected informations which are available online. Discover the right products for your application in the documentations and specifications. For special products, descriptions, or informations which are not listed here, please contact our sales office. | | 1-Gang Surface Boxes, Aluminum, 53xx-0 Series | USA, Canada |
|
| | 1-Gang Weather Resistant Wallplate, Horizontal, Die-Cast Zinc, Self Closing Lids, NEMA 3R
| USA, Canada |
|
| | 4" Round Splice Boxes, Extension Adapters and Cover
| USA, Canada |
|
| | 4" Square Boxes, 1-1/4" and 1-1/2" deep | USA |
|
| | 4" Square Boxes, 2-1/8" deep
| USA |
|
| | 4" Square Boxes, Steel, 1-1/4" deep and 1-1/2" deep, with Knockouts
| USA |
|
| | 4" Square Covers
| USA, Canada |
|
| | 4" Square Covers
| USA, Canada |
|
| | 4-11/16" Square Conduit Boxes are used for a wide variety of industrial applications where larger sized conductors or wiring devices are needed and more volume is required | USA |
|
| | 4-11/16" Square Exposed Work Covers are used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications | USA |
|
| | 90 Degree Short Angle Connectors, for use with EMT conduit to bond EMT conduit to a box or enclosure
| USA, Canada |
|
| | 90 Degree Short Elbows, For Use With Threaded Rigid/IMC Conduit, UL Standard 514B
| USA |
|
| | Accessories Photocells and Hardware | USA, Canada |
|
| | Accessories for Metal Boxes (Grounding Pigtails, Screws and Clips)
| USA, Canada |
|
| | Aluminum Cable Glands, Series 480x, NPT | USA, Canada |
|
| | Aluminum Straight Strain Relief Cord Connetors, 480x Series, NPT Sizes
| USA, Canada |
|
| | Armored and Metal Clad Cable Connectors
| USA, Canada |
|
| | Clamp Type Cable Connectors, For use in dry locations to connect Nonmetallic Sheathed Cable (NMSC) to a box or enclosure
| USA, Canada |
|
| | Clamp Type Connector for Nonmetallic Sheated Cable (NMSC)
| USA |
|
| | Closure Plugs, Rugged Die Cast Zinc, NPT Thread
| USA, Canada |
|
| | Cluster Covers Die Cast Zinc | USA, Canada |
|
| | Complete Outdoor Flip Cover Kits, For use in wet or damp or dry locations, Duplex or Duplex GFCI Receptacle, 15 Amp, 125 Volt AC, NEMA 5-15R, UL and/or c(UL)us Listed | USA, Canada |
|
| | Conduit Nipples, Connectors and Bushings | USA, Canada |
|
| | Conduit and Sealing Locknuts, Sealing Washers | USA, Canada |
|
| | Cord Connectors, Nylon, 1/2" NPT | USA, Canada |
|
| | Cord Connectors, Nylon, 1/4" NPT and 3/8" NPT | USA, Canada |
|
| | Cord Connectors, Nylon, 3/4" NPT and 1" NPT | USA, Canada |
|
| | Covers and Gaskets for Conduit Bodies | USA |
|
| | Decorator Switch Covers, Weatherproof, NEMA 3R, Compatible with single pole or 3-way decorator switches, One to three Gang, Colors: Gray, White or Bronze
| USA, Canada |
|
| | Die Cast Aluminum Single-Gang Boxes, NEMA 3R Rated, Wet, Damp or Dry Locations
| USA, Canada |
|
| | Die Cast Aluminum Single-Gang Boxes, NEMA 3R Rated, Wet, Damp or Dry Locations
| USA, Canada |
|
| | Die Cast Aluminum Single-Gang Extensions and Adapters
| USA, Canada |
|
| | Die Cast EMT Compression Connectors
| USA, Canada |
|
| | Die Cast Zinc Lampholders | USA, Canada |
|
| | EMT Compression Connectors Raintight, Insulated and UnInsulated Throat, Steel, 1/2" to 4" Trade Size
| USA, Canada |
|
| | EMT Compression Couplings Raintight, Steel, 1/2" to 4" Trade Size
| USA, Canada |
|
| | EMT Conduit Handy Ellbows, Female-Female or Male-Female, 1/2" to 1" Trade Size
| USA, Canada |
|
| | EMT Die Cast Compression Couplings
| USA, Canada |
|
| | EMT Fittings Die Cast Handy Ells
| USA, Canada |
|
| | EMT Fittings, Compression Connectors, Steel (Zinc Plated)
| USA, Canada |
|
| | EMT Fittings, Compression Couplings, Die Cast Zinc
| USA, Canada |
|
| | EMT Fittings, Compression Couplings, Steel (Zinc Plated)
| USA, Canada |
|
| | EMT Fittings, Die Cast Compression Connectors
| USA, Canada |
|
| | EMT Fittings, Steel Compression Connectors
| USA, Canada |
|
| | EMT Set Screw Connectors, Steel, Insulated and UnInulated Throat, 1/2" to 4" Trade Size
| USA, Canada |
|
| | EMT Set Screw Couplings, Steel, 1/2" to 4" Trade Size
| USA, Canada |
|
| | EMT Steel Combination Couplings, Threaded/Compression, 1/2"NPT to 1"NPT
| USA |
|
| | EMT Steel Compression Connectors, Sizes 1/2" to 4"
| USA, Canada |
|
| | EMT Steel Set Screw Connectors
| USA, Canada |
|
| | EMT to FLEX Couplings
| USA, Canada |
|
| | Exposed Work Cover, 4" Square
| USA, Canada |
|
| | Exposed Work Steel Covers, 4" Square (101.6x101.6)mm. Covers are used to support switches or receptacles in areas where the box is surface mounted or positioned in exposed work applications.
| USA, Canada |
|
| | Flexible Metal Conduit Combination Couplings and Nail-Up Straps
| USA, Canada |
|
| | Flexible Metal Conduit Fittings Die Cast Zinc/Steel Combination Couplings and Nail-Up Straps | USA, Canada |
|
| | Flexible Metal Conduit Fittings, Die Cast Zinc Straight Squeeze Connectors
| USA |
|
| | Flush Mount Steel Boxes, UL 514A, NEMA OS1 (e.g. Type 565) | USA |
|
| | Flush or Surface Mount Steel "HANDY"-Boxes w/KO's | USA, Canada |
|
| | Gangable & Non-Gangable Switch Boxes, Single-Gang, 2-1/2" (63.5mm) Deep
| USA |
|
| | Gangable Switch Boxes 3" x 2" with Conduit KO′S (Knockouts), Sheet Steel, Switch boxes are used to house wiring devices such as switches or outlets, Gangable switch boxes offer the option of constructing a box to hold two or more devices | USA |
|
| | Handy Box Covers
| USA, Canada |
|
| | Handy Boxes and Extensions, 1-1/2", 1-7/8" and 2-1/8" deep
| USA |
|
| | Handy Boxes, 1-1/2" and 1-7/8" deep
| USA, Canada |
|
| | Handy Boxes, Made of Welded or Drawn Steel, also called Utility Boxes, are used for Convenience Outlets, Switch Boxes or small Junction Boxes.
| USA, Canada |
|
| | Hollow Wall Type Switch Boxes, Plastic & Gangable | USA, Canada |
|
| | Horizontal Mtg 1-Gang Wet Locations Device Covers | USA, Canada |
|
| | Insulated Grounding Bushings, Malleable Iron, for Use with threaded Rigid/IMC Conduit
| USA, Canada |
|
| | Insulated Nipples, Die Cast Zinc
| USA, Canada |
|
| | Lampholder Combinations | USA, Canada |
|
| | Liquidtight Conduit Connectors, 45 Degree, NPT Sizes, Malleable Iron, Insulated and UnInsulated Throat
| USA, Canada |
|
| | Liquidtight Conduit and Cord Connectors, Angled, Steel/Malleable Iron, Strain Relief Cord Connectors, for Wet or Dry & Hazardous Locations
| USA, Canada |
|
| | Liquidtight Conduit and Cord Connectors | USA, Canada |
|
| | Liquidtight Connectors for Extra-Flex Tube #67... | USA, Canada |
|
| | Liquidtight Connectors for Flexible Conduit | USA, Canada |
|
| | Liquidtight Connectors used with Type "A" Conduit | USA, Canada |
|
| | Liquidtight Flexible Nonmetallic Conduit | USA, Canada |
|
| | Liquidtight Strain Relief Cord Connectors, Straight, 1/2" HUBS, Steel/Malleable Iron, Compliance c(UL)us , Suitable for Wet or Dry and Hazardous Locations
| USA, Canada |
|
| | Liquidtight Strain Relief Cord Connectors, Straight, 3/4" and 1" HUBS, Steel/Malleable Iron, Compliance c(UL)us , Suitable for Wet or Dry and Hazardous Locations
| USA, Canada |
|
| | Liquidtight Strain Relief Cord Connectors, Straight, 1-1/4" and 1-1/2" HUBS, Steel/Malleable Iron, Compliance c(UL)us , Suitable for Wet or Dry and Hazardous Locations
| USA, Canada |
|
| | Locking/Power Receptacle Wet Location Wallplates | USA, Canada |
|
| | Malleable Iron Clampbacks for Rigid, IMC and EMT Conduit
| USA, Canada |
|
| | Masonry Boxes, 2-1/2" and 3-1/2" deep
| USA |
|
| | Mini Wet Location Cover and Receptacle NEMA 5-15R, 125V AC, 15 Amps.
| USA, Canada |
|
| | Mini Wet Location Cover and Receptacle NEMA 5-15R | USA, Canada |
|
| | Miscellaneous Fittings, Steel Conduit Hangers with Bolts
| USA, Canada |
|
| | Multi-Gang Boxes and Extensions Die Cast Aluminum | USA, Canada |
|
| | Non-Metallic (Gray PVC) Surface Boxes and Snap-On Covers | USA |
|
| | Non-Metallic Outlet Boxes, 1-Gang or 2-Gang and Round Versions, Marine (UL) Listed, 2014 NEC® compliant, NEMA 3R rated, For general use whenever weatherproof protection is required. | USA |
|
| | Non-Metallic, Extra Flexible Tubing and Connectors
| USA, Canada |
|
| | Nonmetallic Cable Boxes
| USA |
|
| | Nonmetallic Cable Boxes, Heavy-Duty PVC Compound, UL 514-C, UL Green Book, UL Orange Book
| USA |
|
| | Nonmetallic Cable Boxes, Heavy-Duty PVC/Polycarbonate
| USA |
|
| | Nonmetallic Cable Boxes, Made of Heavy-Duty PVC Compound, UL Standard 514C, UL Green Book, UL Orange Book, Old Work
| USA |
|
| | Nonmetallic Cable Boxes, PVC, Polycarbonate
| USA, Canada |
|
| | Nonmetallic Cable Boxes, Single Gang, Heavy Duty PVC compound
| USA |
|
| | Nonmetallic Covers, Plaster Rings, Partitions & Straps
| USA |
|
| | Nylon Cable Glands, Series 47xx, NPT | USA, Canada |
|
| | Offset Connectors, For Use to Bond EMT Conduit to a Box, UL Standard 514B
| USA, Canada |
|
| | One Hole Push-On Straps, Stamped Steel, for EMT Conduit
| International |
|
| | Outdoor Singe-Gang Device Covers, horizontal and vertical Mount, self-closing Lid, Die Cast Aluminum, NEMA 3R, UL, CSA
| USA, Canada |
|
| | Plastic Nailer Type Switch Boxes, e.g. Type 7302 | USA, Canada |
|
| | Plenum Boxes and Cover, 4 inch Square, Drawn with Conduit KO′s Gasketed Cover for 4 inch Square Boxes, UL Listed
| USA, Canada |
|
| | Product Line Overview: RACO Steel Boxes and Covers, Switch Boxes and Wallplates, Non-Metallic and Floor Boxes, EMT and Rigid Fittings, Cord Connectors and Cable Glands, Weatherproof Boxes and Covers, Specialty Switches
| USA, Canada, Mexico |
|
| | RAYNTITE Two-Gang Device Covers, Weatherproof NEMA 3R, Rugged Die Cast Construction
| USA, Canada |
|
| | RAYNTITE® M.R. SRT Single-Gang Weatherproof-While-In-Use Covers, Vertical
| USA, Canada |
|
| | RAYNTITE® M.R. SRT Single-Gang Weatherproof-While-In-Use Covers, Vertical
| USA, Canada |
|
| | Rigid and IMC Compression Connectors
| USA, Canada |
|
| | Rigid and IMC Compression Couplings
| USA, Canada |
|
| | Rigid and IMC Conduit Bodies Type LB | USA, Canada |
|
| | Rigid and IMC Fittings Die Cast Handy Ells
| USA, Canada |
|
| | Rigid and IMC Fittings, One Hole Push-On Straps, Zinc Plated Stamped Steel
| USA, Canada |
|
| | Rigid and IMC Fittings, Steel Reducing Bushings
| USA, Canada |
|
| | Rigid and IMC Fittings, Steel/Malleable Iron Compression Couplings
| USA, Canada |
|
| | Rigid and IMC Insulated Bushings, High Impact Polypropylene, 1/2" to 6"
| USA, Canada |
|
| | Rigid and IMC Insulated Grounding Bushings
| USA |
|
| | Rigid and IMC Steel Locknuts
| USA, Canada |
|
| | Rigid and IMC Steel Locknuts, 3/8" to 6" Trade Size
| USA, Canada |
|
| | Rigid and IMC Threaded Hubs
| USA, Canada |
|
| | Rigid/IMC Compression Connectors, 1/2" to 4" Trade Size, Steel/Malleable Iron
| USA, Canada |
|
| | Rigid/IMC Conduit Handy Ellbows, 1/2" to 1-1/4" Trade Size, Female-Female or Male-Female, Die Cast Zinc
| USA, Canada |
|
| | Rigid/IMC Set Screw Conduit Connectors, Insulated or UnInsulated Throat, Steel, 1/2" to 4" Trade Size
| USA |
|
| | Rigid/IMC Set Screw Conduit Couplings, 1/2" to 4" Trade Size, Zinc Plated Steel
| USA |
|
| | Screw-In Fittings & Connectors for Flexible Metal Conduit | USA |
|
| | Screw-In Type Connectors and Couplings for Flexible Metal Conduit, Die Cast Zinc
| USA, Canada |
|
| | Sealing Washers, Steel, For use whenever a positive seal is required between the shoulder of a fitting and an enclosure
| USA, Canada |
|
| | Single Gang Nonmetallic Cable Boxes
| USA |
|
| | Single Gang Switch Boxes
| USA |
|
| | Single-Gang Blank Covers and Mini-Plate | USA, Canada |
|
| | Single-Gang Device Covers, Weatherproof
| USA, Canada |
|
| | Single-Gang Device Covers, Weatherproof, Die Cast Aluminum
| USA, Canada |
|
| | Single-Gang Extensions and Adapters, Die-Cast Aluminum, NEMA 3R
| USA, Canada |
|
| | Single-Gang Lever Switch Covers with "on-off" Type Switch, NEMA 3R
| USA, Canada |
|
| | Single-Gang Lever Switch Covers, Weatherproof
| USA, Canada |
|
| | Single-Gang Weatherproof GFCI Device Covers, NEMA 3R
| USA, Canada |
|
| | Single-Gang Weatherproof While-In-Use Covers
| USA, Canada |
|
| | Single-Gang Weatherproof While-In-Use Covers, NEMA 3R, NEC 410-57(b)
| USA, Canada |
|
| | Special Steel Device Covers used with "HANDY"-Box | USA, Canada |
|
| | Square Boxes 4" (101.6 x 101.6)mm, Inside Deep 2-1/8" (54.0mm), Welded Steel with Conduit KO′s, 30.3 Cubic Inches. Square boxes are used where multiple conductor runs are split into two or more directions to bring power to a number of electrical devices.
| USA |
|
| | Steel 4 Inch Square Boxes with 1/2" and 3/4" Knock-Outs | USA |
|
| | Steel Cable Glands, Series 37xx, NPT | USA, Canada |
|
| | Steel Conduit Hangers with Bolts
| USA, Canada |
|
| | Steel Cord Connectors 1/2" NPT, 3702 Series | USA, Canada |
|
| | Steel Cord Connectors 3/4" NPT, 3703 Series | USA, Canada |
|
| | Steel Cord Connectors NPT, 3704/3705/3706 Series | USA, Canada |
|
| | Steel Device Covers for 4 Inch Square Boxes | USA, Canada |
|
| | Steel Handy or Utility Box Covers and Extensions, Handy Box covers are used to close a Handy Box, Covers also may be used as single gang wall plates
| USA, Canada |
|
| | Steel Masonry Boxes, 1-Gang to 6-Gang, 2-1/2" (63.5mm) Deep or 3-1/2" (88.9mm) Deep, Nongangable with Conduit KO′s, Masonry boxes are designed to accommodate the mounting of switches or other devices in masonry walls
| USA |
|
| | Steel Octagon Boxes with Side Mounting Bracket and Covers | USA |
|
| | Steel Reducing Bushings
| USA |
|
| | Steel Set Screw Connectors and Couplings for EMT | USA, Canada |
|
| | Straight Connectors, Nylon, for use with Type B Conduit, dry and wet locations
| USA, Canada |
|
| | Straight Liquidtight Conduit Connectors, Steel/Malleable Iron, UL Standard 514B, CSA C22.2 #18, Suitable for Hazardous Locations, For use in outdoor or indoor locations on flexible metallic liquidtight conduit and Type B flexible nometallic liquidtight conduit
| USA, Canada |
|
| | Straight Squeeze Connectors for use with Flexible Metal Conduit, Malleable Iron
| USA, Canada |
|
| | Strain Relief Cord Connectors, Nonmetallic Nylon, Suitable for use in Class I, Div 2; Class II, Div 1 & 2; and Class III, Div 1 & 2 hazardous locations | USA, Canada |
|
| | Surface Cast Aluminum Weatherproof 2-Gang Boxes (#53xx-0) | USA |
|
| | Threaded Conduit Body, Malleable Iron, Type C | USA |
|
| | Threaded Conduit Body, Malleable Iron, Type LB | USA |
|
| | Threaded Conduit Body, Malleable Iron, Type LL | USA |
|
| | Threaded Conduit Body, Malleable Iron, Type LR | USA |
|
| | Threaded Conduit Body, Malleable Iron, Type T | USA |
|
| | Threaded Conduit Body, Malleable Iron, Type X | USA |
|
| | Threaded Hubs for use with Rigid/IMC Conduit | USA, Canada |
|
| | Threaded Hubs, Insulated Throat, For use with threaded rigid/IMC conduit to connect and bond conduit to a threadless opening in a box or enclosure, May be used in wet or dry locations
| USA, Canada |
|
| | Two Hole Steel Straps for EMT Conduit
| USA, Canada |
|
| | Two-Gang Boxes, Die cast Aluminum, Surface Mount
| USA, Canada |
|
| | Two-Gang Device Covers | USA, Canada |
|
| | Two-Gang Die-Cast Aluminum Boxes for use in branch circuit wiring in wet, damp, or dry locations.
| USA, Canada |
|
| | Two-Gang and Three-Gang Device Covers | USA, Canada |
|
| | Type B Liquitight Flexible Nonmetallic Conduit, Sizes 3/8" to 2"
| USA, Canada |
|
| | Uninsulated Die Cast Zinc Nipples, 1/2" to 4"
| USA, Canada |
|
| | Vertical Mtg 1-Gang Wet Locations Device Covers | USA, Canada |
|
| | Weather Resistant Boots for Plugs and Connectors | USA, Canada |
|
| | Weatherproof 2-Gang Aluminum Duplex Device Covers | USA, Canada |
|
| | Weatherproof Blank Covers, Rated NEMA 3R, c(UL)us Listed, Single Gang and Two Gang or Three Gang Models, Gray and White or Bronze Finish, For use whenever weatherproof protection is required for a weatherproof box.
| USA, Canada |
|
| | Weatherproof Box Extension for 1- & 2-Gang Boxes | USA, Canada |
|
| | Weatherproof Device Covers, NEMA 3R, Rugged Metallic Construction, Self-Closing Lid
| USA, Canada |
|
| | Weatherproof Three Gang Device Covers and Surface Mounting Box, UL/cUL Listed, NEMA 3R Rated, For use whenever weatherproof protection is required for an outdoor receptacle
| USA, Canada |
|
| | Weatherproof Two-Gang Device Covers | USA, Canada |
|
| | Weatherproof While-In-Use Covers, Polycarbonate
| USA, Canada |
|
| | Wet Location Aluminum Blank Wallplates, 1-/2-Gang | USA, Canada |
|
| | Wet Location Cover # 5180-0 for Duplex Receptacle | USA, Canada |
|
| | Wet Location Cover and Switch Combinations | USA, Canada |
|
| | Wet Location Lever Switch Cover, 5121-0 Series | USA, Canada |
|
| | Wet Location Single Receptacle or Switch Covers | USA, Canada |
|
| | Wet Locations Aluminum Single-Gang Surface Boxes | USA, Canada |
|
| | Wet Locations Aluminum Two-Gang Surface Boxes | USA, Canada |
|
| | Wet Locations Single-Gang Die Cast Device Cover for use with Duplex Receptacles
| USA, Canada |
|
| | Wet Locations Single-Gang Die Cast Device Covers for use with Single Receptacles, Duplex Devices or GFCI Devices, NEMA 3R
| USA, Canada |
|
| | While In Use Cover One Gang Deep Multi Directional
| USA, Canada |
|
|