Retail High Bay T8 Direct Louvers |
|
Features and Specifications |
Intended Use |
• | The MS8 is ideal for low to medium mounting heights where energy efficiency and a shielded or an open optical system is required for high light levels and excellent color. |
|
• | The enhanced performance of the MS8 provides improved vertical and horizontal illumination in aisle or warehouse applications. |
|
• | The MS8 is ideal for retail, warehouse, manufacturing or any application where a high lumen package in a compact fixture design is required. |
|
• | Certain chemicals that may exist in end-user locations release airborne contaminants that can impact the integrity and safety of key fixture components. Please refer to the environmental compatibility chart located in the Product Selection Guide are considered when selecting fixtures. |
|
|
|
|
• Certain airborne contaminants can diminish integrity of acrylic.Learn More… |
|
Acrylic & Polycarbonate Compatibility |
|
• | Certain chemicals that may exist in end-user locations release airborne contaminants that can impact the integrity and safety of key fixture components that contain acrylic material. |
|
• | Immediate damage may occur such as crazing, cracking, permeation losses and mechanical failure. |
|
• | Products with visually noticeable deterioration have diminished integrity and must be replaced immediately with a more suitable product for the application. |
|
• | This table identifies the most common chemicals and is not intended to be all-inclusive. |
|
• | Exposure to compounds identified as "Not Acceptable" will void all warranties associated with the product. |
|
• | Acrylic components should not be used in areas where these chemicals are used and where these chemicals become mists or airborne vapors. |
|
• | Ensure that chemical interactions are considered when selecting fixtures. |
|
• | For additional information please consult an authorized factory representative. |
|
|
|
NOT Acceptable |
NOT Acceptable |
NOT Acceptable |
• |
Acceptable |
Acceptable |
Acetaldehyde, 100% |
Dibutyl Sebacate |
Petroleum Ether |
• |
2-Ethylhexyl Sebacate |
Nitrogen Monoxide Gas |
Acetates |
Diethyl Ether |
(100-120C) |
• |
Acetic Acid 5% |
Olefric Carbolic Acids |
Acetic Acid, Glacial, 100% |
Dimethyl Formamide |
Phenois |
• |
Ammonia-based Cleaners |
Oleic Acid |
Acetic Anhydride |
Dioctyl Sebacate |
Phenol, Aqueous, 5% |
• |
Ammonia Gas |
Olive Oil |
Acetone |
Dioxane |
Phosphoric Acid, |
• |
Ammonium Hydroxide, 28% |
Oxalic Acid, 100% |
Acetonitrile |
Ether |
95% @ 20C |
• |
Ammonium Nitrate |
Oxygen Gas |
Acetophenone |
Ethyl Acetate |
Phthalates |
• |
Ammonium Phosphate |
Ozone Gas |
Acrylic Paints |
Ethyl Alcohol, Concentrated |
Pyridine |
• |
Aniseed, Bay Leaves, Nutmeg |
Paraffi n, Medicinal |
Alcohol, Allyl |
Ethyl Bromide |
Sodium Carbonate, 2% |
• |
Anti-freeze |
Pepper, Cinnamon, Onions |
Alcohol, Amyl |
Ethyl Butyrate |
Sodium Carbonate, 20% |
• |
Beer |
Phosphoric Acid, 10% @ 20C |
Alcohol, Benzyl |
Ethylene Bromide |
Sodium Phosphate |
• |
Bleaching Power Paste |
Photographic Baths |
Alcohol, Ethyl, 100% |
Ethylene Dibromide |
Sulfur Dioxide, Liquid |
• |
Bleaching Powder Solution, 2% |
Polishing Compounds |
Alcohol, Ethyl, 50% |
Ethylene Oxide (Moist) |
Sulfuric Acid, 98% |
• |
Calcium Hypochlorite |
Potassium Chlorate |
Alcohol, Isopropyl, 100% |
Glass Cleaners |
Sulfurous Acid, |
• |
Car Wash Detergent |
Potassium Cyanide |
Alcohol, Methyl, 10% |
Glycol |
Concentrated |
• |
Carbon Dioxide Gas |
Potassium Dichromate, 10% |
Alcohol, Methyl, 100% |
Hydrogen Peroxide, 28% |
Tincture of Iodine, 5% |
• |
Carbon Monoxide Gas |
Potassium Hydroxide @ 20C |
Alcohol, Methyl, 50% |
Hydrogen Peroxide, 3% |
Toluene |
• |
Caustic Potash |
Potassium Permanganate |
Alcohol, N-Butyl |
Iron Perchloride |
Transformer Oil |
• |
Chlorine Based Cleaners |
Potassium Sulfi te |
Amyl Acetate |
Isoctane |
Trichloraethane |
• |
Chlorine, Aqueous, 2% |
Power Steering Fluid |
Aniline |
Isopropyl Alcohol |
Trichloroacetic Acid |
• |
Citric Acid, 10% |
Propylene |
Aviation Fuel (100 Octane) |
Lacquer Thinner |
Trichloroethylene |
• |
Coffee |
Pure-oil Paints |
Benzaldehyde |
Lactic Acid Butyl Ester |
Turpentine |
• |
Cooking Oil |
Silicone Oil |
Benzene |
Mercury Chloride |
Unleaded Gasoline |
• |
Cottonseed Oil |
Silver Nitrate |
Benzoic Aldehyde |
Meta-Cresol |
Vegetable Oil |
• |
Diethylene Glycol |
Soap Suds |
Brake Fluid |
Methanol, 15% |
Xylene |
• |
Epoxy Adhesives |
Soda |
Bromine Gas |
Methanol, Concentrated |
Triethanolamine |
• |
Ethyl Alcohol, 15% |
Sodium Chloride, 10% |
Butanol |
Methyl Benzoate |
Polyalkylene Glycol |
• |
Ethylene Glycol E |
Sodium Cyanide |
Butraldehyde |
Methyl Chloride |
— |
• |
Ethylene Oxide (Dry) |
Sodium Fluoride |
Butyl Acetyl Ricinoleate |
Methyl Cycohexanol |
— |
• |
Ferric Chloride, Aqueous, 10% |
Sodium Hydroxide, 60% |
Butyl Stearate |
Methyl Ethyl Ketone |
— |
• |
Formaldehyde, Aqueous, 40% |
Sodium Nitrate |
Carbolic Acid |
Methyl Naphthalene |
— |
• |
Fruit Juice |
Sodium Thiosulphate, 40% |
Carbon Disultide |
Methyl Salicyclate |
— |
• |
Glycerol |
Stearic Acid |
Cellulose Paints |
Methylamine |
— |
• |
Heptane |
Sulfur Dioxide, Dry Gas |
Chlorinated Hydrocarbons |
Methylene Dichloride |
— |
• |
Hexane |
Sulfuric Acid, 30% |
Chlorinated Solvents |
Mineral Oil |
— |
• |
Hydrochloric Acid, 38% |
Sulfurous Acid, 5% |
Chlorine Gas |
Motor Fuel Mixture, |
— |
• |
Kerosene |
Tararic Acid, 50% |
Chlorophenol |
with Benzene |
— |
• |
Lactic Acid |
Transmission Fluid |
Chromic Acid, 40% |
Nail Polish |
— |
• |
Metal Carbonates |
Tricresyl Phosphate |
Cloves |
Naphtha |
— |
• |
Metal Chlorides |
Triethyl Amine |
Cosmoline Removers |
N-Butyric Acid, 100% |
— |
• |
Metal Sulfates |
Vinegar |
Cresol |
Nitric Acid, 40% |
— |
• |
Methane Gas |
Water, Mineral Water |
Cyclohexane |
Nitric Acid, 70% |
— |
• |
Milk |
Wax Polish |
Cyclohexanone |
Nitrobenzene |
— |
• |
Milk, Chocolate |
White Spirit |
Cyclohexene |
N-Octane |
— |
• |
Motor Fuel Mixture, |
Whitewash |
Detergent Solution |
Paint Removers |
— |
• |
without Benzene |
Wine |
Diacetone Alcohol |
Paint Thinner |
— |
• |
Motor Oil |
— |
Diamyl Phthalate |
Perchlorethylene |
— |
• |
Natural Gas |
— |
— |
Organic Solvents |
— |
• |
Nitric Acid, 10% |
— |
— |
— |
— |
• |
Nitrogen Dioxide Gas |
— |
|
|
|
• | The statements, technical information and recommendations obtained herein are for informational purposes and may not be current as to recent revisions. |
|
• | Please contact a factory representative for additional information. |
|
• | Since the conditions and methods of use of the product and of the information referred to herein are beyond our control, |
|
• | We expressly disclaims any and all liability. |
|
• | NO WARRANTY OF FITNESS FOR ANY PARTICULAR PURPOSE, WARRANTY OF MERCHANTABILITY OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. |
|
• | The user should thoroughly test any application before commercialization. |
|
|
|
|
• | Clean and unassuming appearance with shielding provides a decorative approach that provides a powerful lighting package with high light levels. |
|
|
|
|
Construction |
• | Channel and louvers are formed from cold-rolled, 20-gauge steel. |
|
• | Fixture is asbestos-free. |
|
• | Compact sockets feature rotating collars and enclosed contacts. |
|
• | End caps include knockouts for through wiring and fixture attachment in row mounting applications. |
|
• | Designed for simple installation and servicing, louver assembly hinges remain attached and hinge down to provide easy access into the optical system. |
|
• | Convenient access plate is located on the back of the channel for easy access to the wiring compartment. |
|
• | Finish: High-gloss, baked white enamel finish. |
|
• | Five-stage iron-phosphate pretreatment ensures superior paint adhesion and rust resistance. |
|
|
Optics |
• | Available to meet individual lighting application requirements with variety of optical systems and lamp configurations. |
|
• | The Narrow Distribution (ND) includes a Miro4™ parabolic reflector system to provide high vertical and good horizontal illumination. Ideal for aisle or rack lighting. |
|
• | The Wide Distribution (WD) is ideal for general area lighting at higher mounting heights or where widespread distribution is preferred. |
|
• | Both distributions are available with white straight blade louver for additional shielding and brightness control. |
|
• | Optional uplight component softens ceiling appearance and reduces the "cavern effect". |
|
|
|
|
|
Electrical |
• | Thermally protected, resetting, Class P, HPF, non-PCB, UL listed and CSA certified. A+ sound rated electronic ballast. |
|
• | AWN, TFN or THHN wire used throughout, rated for required temperatures. |
|
|
Installation |
• | A variety of mounting arrangements are available including tong hangers, aircraft cables and stems. |
|
• | Suitable for mounting in continuous row or individual mounting. |
|
• | End caps include knockouts for through wiring and fixture attachment in row mounting applications. |
|
|
Listings |
|
• | UL listed 25°C ambient temperatures. |
|
• | CSA optional; (consult factory). |
|
• | NOM optional; (consult factory). |
|
|
|
|
Products |
Catalog No. |
Configuration |
Description |
Stock |
|
MS8 2 32 SBL ND MVOLT GEB10IS |
Series (MS8) 2x 32W T8 48" (2 32) white straight blade louver assembly (SBL) narropw Distribution (ND) 120V-277V (MVOLT) T8 instant start electronic ballast, <10% THD (GEB10IS) |
1 |
|
|
Accessories (order as separate catalog number) |
Catalog No. |
Description |
Stock |
MSHBAC_ |
Adjustable aircraft cable system (specify 36, 72 or 120 inches)6 |
|
MSHBACF_ |
Adjustable aircraft cable system with power feed (specify length as 36, 72 or 120 inches) (three-wire cable)6 |
|
MSHBAC2F_ |
Adjustable aircraft cable system with power feed (four-wire cable) (specify length as 36, 72 or 120 inches)6 |
|
SQ_ |
Swivel-stem hanger (specify lengths in 2" increments) |
|
HC36 |
Chain hangers (1 pair, 36" long) |
|
|
Tong hangers |
2 |
WGMS8Z |
4′ wire guard, zinc coated |
|
|
|
|
|
|
|
| Suitable Lamps |
Product image |
Product group and Description |
|
|
Linear T8 Standard Fluorescent Lamps featuring ALTO II™ Technology, Extra Low Mercury, 17 to 32 Watts, Nominal Length from 24" to 48", Color Temperatures 3500K to 5000K |
|
|
Linear Fluorescent Lamp, 32 Watt, Bulb T8 Ø 1" (25.4mm), Nominal Length 4 foot (1219.2mm), Medium Bi-Pin Base (G13), Lumens 2915 lm, Color Temperature 4100K (cool white), Model F32T8/XL/SPX41/HL/ECO |
|
|
Select desired product group above to get further informations. |
|
|
|
|
|
Specifications and information are nominal and are subject to change without notice.