USA, Canada |
|
|
Designed for use in Hazardous Locations |
|
The Electraray® Model 224XST hazardous location strobe light provides 80 high intensity flashes per minute. This warning light is available in 24VDC. The 224XST has an effective candela of 240 and a 580,000 peak candlepower. Electraray® 224XST contains a supervisory diode and four wire leads for fire alarm applications. |
|
The Model 224XST has been certified by UL as meeting NEMA Type 4X watertight and corrosion resistant requirements, constructed to IP66. This hazardous location warning light has a black polyurethane coated base and the inner fresnel lens is available in five colors (including magenta). The clear polycarbonate outer dome can be quickly removed for easy access to inspect the unit or change the lamp. The 224XST has an effective candela of 240 and a 580,000 peak candela. |
|
The 224XST is UL Listed, CSA Certified and CSFM Approved for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; and Class III. |
|
The Electraray® 224XST contains a supervisory diode and four wire leads, for fire alarm applications. |
|
Model 224XST is ideal for wet, corrosive atmospheres like those found in food processing industries, or anywhere a visual signal is needed. |
|
The affordable Electraray® Strobe Warning Light is specifically designed for use in hazardous locations or where corrosive materials are present. |
|
|
|
Features and Specifications |
|
|
• | Four wires and supervisory diode |
|
• | Five lens colors (red, blue, clear, amber, magenta) |
|
• | 10,000 hour, highintensity strobe tube |
|
|
• | Operating temperature: -40°F to +104°F (-40°C to +40°C) |
|
• | Overall dimensions: Ø 5.5" (139.7mm), Height 7.5" (190.5mm) |
|
• | NEMA Type 4X, IP66 enclosure |
|
• | CSFM Approved (Listed by California State Fire Marshall) |
|
|
|
|
|
Hazardous Location Rating |
|
Hazardous Location |
|
40°C* |
Class I, Division 2, Groups A, B, C, D |
|
T2A/280 |
Class II, Division 2, Groups F, G |
|
T5/100 |
Class III |
|
T5/100 |
|
*T-Code at Maximum Ambient Temperature, °C |
|
|
|
| Model Specifications | |
Model |
Voltage |
Operating Current |
Flash Rate per Minute |
Candela Peak (1) |
ECP (2) |
Pipe Mount |
224XST |
24VDC |
0.7 Amp (2.0A, in-rush) |
80 |
580,00 |
240 |
1/2" NPT |
|
|
|
|
(1) Peak candela is the maximum light intensity generated by a flashing light during its light pulse |
(2) ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily |
|
|
Further Information |
|
• |
|
Active Catalog Numbers within this Product group |
|
|
|
PLEASE NOTE |
Currently no active products found. (ECODE 900202) Please contact our customer service. |
|
|
|
|
|
• |
|
Designed for use in Hazardous Locations |
|
The Electraray® Model 224XSTHI hazardous location strobe light provides 80 highintensity flashes per minute. This warning light is available in 24VDC. |
|
The Model 224XSTHI has been certified by UL as meeting NEMA Type 4X water tight and corrosion resistant requirements, constructed to IP66. This hazardous location warning light has a black polyurethanecoated base and a clear inner fresnel lens to meet the requirements of Hearing Impaired Signals. The clear polycarbonate outer dome can be quickly removed for easy access to inspect the unit or change the lamp. The 224XSTHI has an effective candela of 240 and a 580,000 peak candela. |
|
The 224XSTHI features a voltage inrush limiting PCB design that provides greater compatability with control systems and fire alarm panels and less electrical interference with inrush sensitive devices. |
|
The 224XSTHI warning light is UL Listed for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; and Class III. The 224XSTHI is also CSFM Approved. |
|
The Electraray® 224XSTHI contains a supervisory diode and four wire leads for fire alarm applications. This strobe is UL 1971 Listed for hearing impaired applications. |
|
|
|
|
Model 224XSTHI |
|
Electraray® Supervised Hearing Impaired Hazardous Location Strobe Warning Light |
|
|
Features and Specifications |
|
|
• | Four wires and supervisory diodes |
|
|
• | 10,000 hour, highintensity strobe tube |
|
|
• | Operating temperature: -40°F to +104°F (-40°C to +40°C) |
|
• | Overall dimensions: Ø 5.5" (139.7mm), Height 7.5" (190.5mm) |
|
• | NEMA Type 4X, IP66 enclosure |
|
• | CSFM Approved (Listed by California State Fire Marshall) |
|
|
|
|
Hazardous Location Rating |
|
Hazardous Location |
|
40°C* |
Class I, Division 2, Groups A, B, C, D |
|
T2A/280 |
Class II, Division 2, Groups F, G |
|
T5/100 |
Class III |
|
T5/100 |
|
*T-Code at Maximum Ambient Temperature, °C |
|
|
|
| Model Specifications | |
Model |
Voltage |
Operating Current |
Flash Rate per Minute |
Candela Peak (1) |
ECP (2) |
Pipe Mount |
224XSTHI |
24VDC |
0.7 Amp (2.0A, in-rush) |
80 |
580,00 |
240 |
1/2" NPT |
|
|
|
|
(1) Peak candela is the maximum light intensity generated by a flashing light during its light pulse |
(2) ECP (Effective Candela) is the intensity that would appear to an observer if the light were burning steadily |
|
|
|
• |
|
Replacement Parts |
|
|
|
PLEASE NOTE |
Currently no active products found. (ECODE 900202) Please contact our customer service. |
|
|
|
|
|
|
|
|
|
|
|
If the desired product is not listed, please contact our sales office. |
Specifications and information are nominal and are subject to change without notice.