HXPL Hazardous Location |
Hazardous Area LED Lighting Fixtures, c(UL)us, UL Listed |
2 Foot and 4 Foot Models, Targeted Countries: North America |
|
|
|
Specifications |
|
• | Architectural Style: Traditional |
|
• | Mounting Type: Pendant, Surface, Suspended |
|
• | Mounting Location: Ceiling, Wall |
|
• | Lumens: 3000 LM, 4000 LM, 5000 LM, 8000 LM, 10000 LM |
|
• | CCT / LED Color: 3000 K, 4000 K, 5000 K |
|
|
• | Compliance Listing: DLC Standard |
|
• | Environmental Listing: Class I, Div 1, Class I, Div 2, Class II, Div 1, Class III, IP66, Marine Rated, NEMA 4X, Wet Location |
|
• | Regulatory Listing: C-UL-US, UL |
|
|
• | Dimming Protocol: 0-10V |
|
• | Voltage Rating: 120, 208, 240, 277 |
|
• | Primary Material: Aluminum |
|
|
|
Description |
• | Versatile heavy-duty, explosion-proof LED fixture designed for hazardous environments where flammable gases or vapors, flammable liquids, combustible dust and/or ignitable fibers may exist. |
|
• | Suitable for wet locations and marine environments where saltwater spray is an issue. |
|
• | Also suitable for indoor and outdoor areas where corrosive chemicals exist. |
|
• | Certain airborne contaminants may adversely affect the functioning of LEDs and other electronic components, depending on various factors such as concentrations of the contaminants, ventilation, and temperature at the end-user location. |
|
|
|
Optics |
• | Explosion-proof, impact and heat resistant glass tubes, provide LED protection. |
|
• | Optional wire guard and/or clear polycarbonate shield available for additional security. |
|
• | Heavy gauge extruded aluminum reflectors (2.5 millimeters thick), with high gloss reflective finish. |
|
• | Resists dents and corrosion. Easy, quick removal for cleaning. |
|
Electrical |
• | 0-10 Volt Dimming if ordered with DM option. |
|
• | Driver has 1.5kV surge protection, for additional surge protection against power line transient surges, installer will need to provide remote surge protection. |
|
|
|
Mechanical |
|
• | Fixture constructed of corrosion-resistant, copper-free aluminum alloy (less than 0.4% copper). |
|
• | Over-sized, finned driver housing provides greater heat dissipation and extended driver life. |
|
• | Maintenance can be done quickly from either end of the fixture. All access covers are screw type and interchangeable with O-ring seals. Easily accessible and externally mounted. |
|
• | Suitable for -20°C to 55°C Ambient Temperature. |
|
|
|
Listings |
• | UL844 listed (see matrix): Class 1, Division 1 & 2, Groups C, D Class 2, Division 1, Groups E,F, G Class 3 Simultaneous presence |
|
• | UL 1598A Marine Outside |
|
|
|
|
|
• | DesignLights Consortium® (DLC) Premium qualified product. Not all versions of this product may be DLC Premium qualified. Please check the DLC Qualified Products List to confirm which versions are qualified. |
|
|
|
Note: Actual performance may differ as a result of end-user environment and application. All values are design or typical values, measured under laboratory conditions at 25°C. Specifications subject to change without notice. |
|
|
Please contact our sales office for additional information. |
Specifications and information are nominal and are subject to change without notice. Contact our sales office for additional information.
|
Catalog No. |
Description |
|
Stock |
|
Hazardous Location LED Fixture, Model HXPL L24 2 3L AS NDM 40K EMO, Nominal 24" long (609.6mm), 2 Lamp Profile, 3000 Nominal Lumens, Auto-Sensing (120V-277V), Non-Dimming, 4000K, Emergency Operation Only |
|
|
|
Hazardous Location LED Fixture, Model HXPL L48 2 5L AS NDM 40K EM10WCP, Nominal 48" long (1219.2mm), 2 lamp profile, 5000 nominal lumens, Auto-Sensing (120V-277V), Non-Dimming, 4000K, Generic Emergency Battery Back Up 10W |
|
|
|
Wall/Ceiling Mounting Kit (For 2 Lamp Fixtures only) |
|
|
|