Explosion Proof Fluorescent Luminaires, Class I, Division 1 |
|
|
Applications |
• | EVFDR Luminaires are suitable for wet locations and marine environments, above and below deck, where hazardous vapors, gases or dusts are present |
|
• | Ideally suited for use on offshore drilling/production platforms and on shipboard in hazardous areas |
|
• | For mounting where headroom is limited |
|
• | For hazardous areas where watertightness and corrosion resistance are required |
|
|
|
|
• | Exterior surfaces finished with gray epoxy enamel for corrosion resistance |
|
• | Exterior hardware stainless steel |
|
• | All joints sealed and gasketed for watertightness |
|
• | Vibration resistant • Shock mounts • Sockets are spring loaded for tight lamp contact connection |
|
• | Heavy duty glass lamp tubes for maximum strength and impact resistance |
|
• | All exterior materials are non-sparking |
|
• | C-type beam clamps provide quick and easy mounting |
|
• | Luminaire is adjustable 30° either side of fixture axis, allowing for control of light output |
|
• | Beam clamp support is adjustable allowing beam clamp to be located to suit structure |
|
• | Low profile - luminaire height is 713/16" with standard mounting, 1111/16" with shock mounting option - for maximum clearance where headroom is critical |
|
• | Provides cool light with natural color rendition |
|
• | Continuous and uniform illumination made possible by mounting end to end (no space needed between luminaires for relamping) - see page 1077 for relamping information |
|
• | Relamping is accomplished without tools; quarter-turn fastener allows end of luminaire to be lowered quickly; cable supports end of luminaire while relamping - both hands are free; threaded lamp tube cover provides quick and easy access to lamp and receptacle |
|
• | Reflectors can be removed or replaced with only a screwdriver |
|
• | Ballast housing readily accessible |
|
• | Minimum weight - copper-free aluminum construction throughout |
|
• | Type P ballast furnished in compliance with NEC |
|
• | Standard electronic ballast for 32 watt and 40 watt rapid start |
|
• | Standard energy-efficient electromagnetic ballast (40W slimline, 60W and 110W) is standard |
|
• | Low temperature ballasts are standard on 32W T8, 40W slimline, 60W and 110W; 32 watt and 40 watt low temperature ballasts are rated for 0°F; 60 and 100 watt low temperature ballasts are rated for -20°F |
|
|
|
|
|
Standard Materials and Finishes: |
• | Housing - copper-free aluminum |
|
• | Exposed hardware - stainless steel |
|
• | All exterior metal components - gray epoxy enamel |
|
• | Reflectors - white epoxy powder coat |
|
|
|
|
Electric (2–lamp only) |
• | Electrical Rating Ranges: • 32W T-8 medium Bi-pin 265mA lamps • 40W T-12 medium Bi-pin rapid start 430mA lamps • 60W T-12 recessed contact, 800mA lamps • 110W T-12 recessed contact, 1500mA lamps |
|
|
|
|
Suffix : Description |
• | S714: Furnished with lamps |
|
• | S715: Furnished with safety cable for high vibration areas. |
|
• | KIT40: Beam clamps with shock mounts are available for ease of installation and resistance to vibration |
|
|
• | BY: Low temperature electromagnetic ballast: 40W rapid start rated 0°F |
|
• | S799: Emergency lighting battery unit |
|
|
|
|
Certifications and Compliances |
• | NEC and CEC: • Class I, Division 1, Groups C, D • Class I, Zone 1, Group IIB • Class II, Groups E, F, G • Class III • Simultaneous Presence (Cl. and Cl. II) |
|
• | UL Standards: • 844 Hazardous (Classified) Locations • 1598 Luminaires • 1598A Marine Locations |
|
• | CSA Standards: • C22.2 No. 137 |
|
|
|
Products |
Catalog No. |
Type |
Voltage |
Lamps |
|
Emergency Fixtures |
|
EVFDR22029/UNV-S714-S799 |
120V-277V |
2x 32W T8 265mA med.bi-pin |
|
Standard Fixtures |
|
EVFDR22029/UNV-S714 |
120V-277V |
2x 32W T8 265mA med.bi-pin |
|
|
EVFDR22082-S714 |
110V-125V |
2x 40W T12 430mA med.bi-pin |
|
|
EVFDR22062-S714 |
110V-125V |
2x 60W T12 800mA recessed contact |
|
|
EVFDR22072-S714 |
110V-125V |
2x 110W T12 1500mA recessed contact |
|
|
|
|
|
|
|
|
|
|
|
|
|
Specifications and information are nominal and are subject to change without notice.