Catalog No. : 4792
EDP Number : 115093
Target Countries : USA, Canada, Mexico
Description :
Duplex Combination Receptacle 15A-125V, 1 Feed + 1 Neutral Return, (1)NEMA 5-15R & (1)NEMA L5-15R, UL, CSA
Country of origin : MX – MEXICO
Taric Number : 85366990
Subject to change
Brandname : Leviton
Logistic Informations
Standard qty. : 3200 Each
Carton quantity (VPE) : 10 Each
Shipping weight : 0.130 kg / Each
Gross volume : 0.343 m³ / 1000
Net weight : 0.092 kg / Each
General Information
Special Features : Combination Duplex Receptacle, Smooth Face
Device Grade : Heavy-Duty Industrial Specification Grade
Design Type : Combination Straight Blade and Locking
Configuration : NEMA 5-15R / NEMA L5-15R
SKU Number (Stock Keeping Unit) : 4792
Mechanical Specifications
Product Type : Locking / Straight Blade Receptacle
Type of Terminals : Screw Terminals
Product ID : Ratings and NEMA I.D. permanently marked on device
Screw Terminal Torque : 14-18 in-lbs
Terminal Accom. : #18 to #10 AWG
Terminal ID : Brass-Hot, Green-Ground, Silver-Neutral
Termination : Back or Side Wire, Common Feed
AC Horsepower Ratings
At Rated Voltage : 1/2 HP
Electrical Specifications
Rated Current : 15 Amp
Rated Voltage : 125 Volt AC
Poles and Wires : 2P 3W Self-Grounding (L+N+PE)
Current Limiting : Full Rated Current
Dielectric Voltage : Withstands 2000V per UL498
Temperature Rise : Max 30°C after 250 cycles OL at 200 percent rated current
General Features
- Leviton's Industrial Grade Locking Devices are built to provide unparalleled quality and superior performance in the most severe industrial settings.
- Leviton combines the best materials available with superior production standards to produce a broad selection of Locking Devices of unmatched flexibility and dependability.
Material Specifications
Body Material : Nylon
Device Color : Black
Face Material : Nylon
Grounding Screw : Brass #8-32
Line Contacts : Brass 0.031" Thick (0.79 mm)
Strap Material : Steel
Terminal Screws : Brass #10-32
Yoke : Zinc-Plated Steel
Environmental Specifications
Flammability : Rated V-2 per UL 94
Operating Temperature : -40°C to +60°C (-40°F to +140°F)
Standards and Certifications
ANSI : C-73
CSA C22.2 No. 42 : File 152105 (LR406)
NEMA : WD-6
NOM : 057
UL Fed Spec WC-596 : File E13399
UL498 : File E13399
RoHS status : Compliant
Safety Notes
- Installation may only be carried by people (qualified electricians) with relevant electrical engineering knowledge and experiences!
Disposal Information
- Must not be disposed with household waste!
WARNING: TO BE INSTALLED AND/OR USED IN ACCORDANCE WITH APPROPRIATE ELECTRICAL CODES AND REGULATIONS.
WARNING: IF YOU ARE NOT SURE ABOUT ANY PART OF THESE INSTRUCTIONS, CONSULT A QUALIFIED ELECTRICIAN.
WARNING: TO AVOID FIRE, SHOCK, OR DEATH; TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT POWER IS OFF BEFORE WIRING!
NOTE: USE THIS DEVICE ONLY WITH COPPER OR COPPER CLAD WIRE. WITH ALUMINUM WIRE USE ONLY DEVICES MARKED CO/ALR OR CU/AL.
TO INSTALL: Back or side-wire accepts up to #10AWG copper or copper-clad wire.
2. Remove insulation per "strip gage" on device [approx. 5/8" (15.9 mm)]. Connect per appropriate WIRING DIAGRAM.
NOTE: All receptacles are self-grounding.
Sicherheitshinweise
Nur national gültig in Deutschland /
Safety notes only valid in GermanyInstallation nur durch Personen mit einschlägigen elektrotechnischen Kenntnissen und Erfahrungen!*- Durch eine unsachgemäße Installation gefährden Sie:
- Ihr eingenes Leben und das Leben der Nutzer der elektrischen Anlage!
- Mit einer unsachgemäßen Installation riskieren Sie schwere Sachschäden, z.B. durch Brand.
- Es droht für Sie die persönliche Haftung bei Personen- und Sachschäden.
Wenden Sie sich an einen Elektroinstallateur!
* Erforderliche Fachkenntnisse für die Installation
Für die Installation sind insbesondere folgende Fachkenntnisse erforderlich:- Die anzuwendenden "5 Sicherheitsregeln": Freischalten, gegen Wiedereinschalten sichern, Spannungsfreiheit feststellen, Erden und Kurzschließen, benachbarte unter Spannung stehende Teile abdecken oder abschranken
- Auswahl des geeigneten Werkzeuges, der Messgeräte und ggf. der persönlichen Schutzausrüstung
- Auswertung der Messergebnisse
- Auswahl des Elektro-Installationsmaterials zur Sicherstellung der Abschaltbedingungen
- IP-Schutzarten
- Einbau des Elektroinstallationsmaterials
- Art des Versorgungsnetzes (TN-System, IT-System, TT-System) und die daraus folgenden Anschlussbedingungen (klassische Nullung, Schutzerdung, erforderliche Zusatzmaßnahmen etc.).
In der Endanwendung sind folgende Anforderungen der Norm zu prüfen bzw. sicherzustellen
The following requirements of the standard must be checked and respectively ensured at final application:- Schutz gegen elektrischen Schlag / Protection against electric shock
- Aufbau ortsfester Steckdosen und Einbausteckdosen / Construction of fixed socket-outlets
- Temperaturerhöhung / Temperature rise
- Kriechstrecken, Luftstrecken und Abstände durch Vergussmasse und Isolierung / Creepage distances, clearances and distances through sealing compound