Product availability
Contact our sales office to get additional information
Catalog No. : 524NBK
EDP Number : 122811
Target Countries : Australia, New Zealand
Description :
Mains Line Plug with Grounding Contact, black, Rewireable, 10 Amp 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), Straight Cable entry with Strain relief sleeve, Glass Fibre Reinforced PA/PBT, Screw Terminals, according AS/NZS 3112:2000
Country of origin : DE 09 – GERMANY
Taric Number : 85369010
Subject to change
Brandname : Vendor approved
TECHNICAL INFORMATION
Logistic Informations
Standard qty. : 400 Each
Carton quantity (VPE) : 40 Each
Shipping weight : 0.045 kg / Each
Gross volume : 0.129 m³ / 1000
Net weight : 0.034 kg / Each
General Informations
Product Name : Grounding Plug 10A
Product Type : Rewireable
Model Feature : Straight Cable Entry
Comments : Partial insulated plug pins (Line and Neutral)
Electrical Specifications
Rated Current [In] : 10A
Rated Operational Voltage [Ue] : 250V AC
Poles and Wires : 2P 3W Grounded (L+N+PE)
Material Specifications
Carrying Parts : PBT GF30 Fiberglass Reinforced (30%)
Material of Terminals : CuZn 39
Housing Material : Polyamide 6
Housing Color : Black
Environmental Spezifications
Degree of Protection : IP20
Mechanical Specifications
Type of Terminals : Screw Terminals
Recommended Cable Types : H05VV-F 3G1.0 mm² and 3G1.5 mm²
Wire Stripping : L 25 mm, N 25 mm, PE 30 mm
Strain Relief Sleeve : takes Cable up to Outer Diameter 9.1mm
Torque Range : Terminals (L+N+PE) 0.4 N.m, Cable Clamp 0.6 N.m, Cover 0.4 N.m
Standards and Certifications
Product Standards : AS/NZS 3112
IEC Socket Type : Type I
RoHS Compliance : Yes
Reach Compliance : Yes
Description AS/NZS
The "AS" standard for Australian and "NZS" standard for New Zealand AS/NZS 3112 specifies AC plugs and socket outlets. This configuration has flat blades with ground pin and is also known as "Plug Type I" and is also used e.g. in Fiji and Papua New Guinea.
Plug System
The plug system of the class I (2P+E) in Australia looks similar to the standard in China or Argentina, but is mechanically different. The grounding pin is placed below the two other conductors.
Sicherheitshinweise
Nur national gültig in Deutschland /
Safety notes only valid in GermanyInstallation nur durch Personen mit einschlägigen elektrotechnischen Kenntnissen und Erfahrungen!*- Durch eine unsachgemäße Installation gefährden Sie:
- Ihr eingenes Leben und das Leben der Nutzer der elektrischen Anlage!
- Mit einer unsachgemäßen Installation riskieren Sie schwere Sachschäden, z.B. durch Brand.
- Es droht für Sie die persönliche Haftung bei Personen- und Sachschäden.
Wenden Sie sich an einen Elektroinstallateur!
* Erforderliche Fachkenntnisse für die Installation
Für die Installation sind insbesondere folgende Fachkenntnisse erforderlich:- Die anzuwendenden "5 Sicherheitsregeln": Freischalten, gegen Wiedereinschalten sichern, Spannungsfreiheit feststellen, Erden und Kurzschließen, benachbarte unter Spannung stehende Teile abdecken oder abschranken
- Auswahl des geeigneten Werkzeuges, der Messgeräte und ggf. der persönlichen Schutzausrüstung
- Auswertung der Messergebnisse
- Auswahl des Elektro-Installationsmaterials zur Sicherstellung der Abschaltbedingungen
- IP-Schutzarten
- Einbau des Elektroinstallationsmaterials
- Art des Versorgungsnetzes (TN-System, IT-System, TT-System) und die daraus folgenden Anschlussbedingungen (klassische Nullung, Schutzerdung, erforderliche Zusatzmaßnahmen etc.).
In der Endanwendung sind folgende Anforderungen der Norm zu prüfen bzw. sicherzustellen
The following requirements of the standard must be checked and respectively ensured at final application:- Schutz gegen elektrischen Schlag / Protection against electric shock
- Aufbau ortsfester Steckdosen und Einbausteckdosen / Construction of fixed socket-outlets
- Temperaturerhöhung / Temperature rise
- Kriechstrecken, Luftstrecken und Abstände durch Vergussmasse und Isolierung / Creepage distances, clearances and distances through sealing compound
GENERAL NOTES
Non stock products are procurement goods, can only be ordered in standard packaging quantities and have a minimum order value. The actual product may differ from the illustration shown. The information provided here is subject to change without notice. The product availability is continuously updated every 15 minutes on working days. The product shown is for the use in the specified country. If no CE reference is included in the product description, the use of this product within the European Union or the CE marking itself is not permitted. The use of non-compliant equipment within the European Union is prohibited by law.
SAFETY NOTES Installation may only be carried by people (qualified electricians) with relevant electrical engineering knowledge and experiences!
DISPOSAL INFORMATION Must not be disposed with household waste!
WEEE No.: DE 54087582 — Information provided in compliance with §18 paragraph 4 sentence 3 WEEE Directive available at
www.bmuv.de