Australia, New Zealand |
|
|
|
|
|
Weathershield® Socket Outlets are ideal for ′all weather′ applications. |
|
|
Both Single and Twin Gang Outlet models are available. An extra switch variation is also available in the Twin Outlet model. The single and double unit features an all-in-one switch socket mechanism that eliminates the usual forest of wires looping the socket. There are ample entries in the base and this base is common with WSC227/2 sockets. Four 25mm plain, and one 25mm screwed entry as well as two 25mm rear entry cut outs and one 25mm push out for back wiring. |
|
Plugs, fixing screw caps and caps for cover mounting screws are provided. Screw caps must be in place to ensure maximum IP Rating. All outer mouldings are impact resistant. Overall dimensions fully assembled are 115mm x 85mm. Height from wall is 80mm. Outlet terminals accommodate 3 x 2.5mm² cables. Products are Authority approved and comply with AS 60529 ′Degrees of Protection′ and all relevant tests specified to AS/NZS 3112. Mines and Energy South Australia Approval S/1. Available in chemically resistant Grey, White, Cream or Terracotta. |
|
Surface Sockets supplied with surface Backbox. Double Enclosure WSF226E2 Backbox available. |
|
|
|
|
|
Product availability |
Product image |
Catalog No. and Description |
|
Stock |
|
Double Surface Mounting Switched Socket Outlet, 15 Amp, 250 Volt AC, Resistant Grey, Weather Protected, Weathershield, IP53 |
|
28 |
|
Double Surface Mounting Switched Socket Outlet, 10 Amp, 250 Volt AC, Resistant Grey, Weather Protected, Weathershield, IP53 |
|
3 |
|
Single Surface Mounting Switched Socket Outlet, 15 Amp, 250 Volt AC, Resistant Grey, Weather Protected, Weathershield, IP54, with Hinge Flap |
|
1 |
|
Select desired product above to get further informations. Non stock products have a minimum order quantity. |
|
|
|
|
How to Order — Weathershield® Switched Socket Outlets |
|
|
|
Additional Support |
• |
|
|
Standard AS/NZS 3112 |
 |
 |
 |
Australia, New Zealand Weatherproof Surface Mounting Socket Outlets |
|
|
|
|
|
|
Single Switched Surface Mounting Socket Outlet, IP53 | | Impact and corrosion resistant. Ideal for residential and commercial applications. AQUA weatherproof was specifically designed for outdoor use. Tough but attractive, this sturdy multi-purpose outdoor range of products is safe alternative for locations where water and moisture may be present. | | • | Side Operating Lever for ON/OFF Switch (padlockable) |
| • | Provided with Flap to Cover Outlet and give IP53 Protection |
| • | Voltage Rating: 240 Volt AC, 2 Pole 3 Wire Grounding (2P+E) |
| • | Screw Terminals (takes up to 4 mm² Conductors) |
| • | Product Size (84x84x70)mm |
| • | Standards Australia/New Zealand: AS/NZS 3112 |
| • | Standard Color: Mist Grey (MG) (selected products available in white on special order only) |
| |
Catalog Number |
Description |
Stock |
|
Single Switched Socket Outlet, 10A, Surface Mounting, Weatherproof, IP53, Mist Grey |
|
|
Single Switched Socket Outlet, 15A, Surface Mounting, Weatherproof, IP53, Mist Grey |
5 |
|
|
|
|
|
|
|
|
Double Switched Surface Mounting Socket Outlet, IP53 | | Impact and corrosion resistant. Ideal for residential and commercial applications. AQUA weatherproof was specifically designed for outdoor use. Tough but attractive, this sturdy multi-purpose outdoor range of products is safe alternative for locations where water and moisture may be present. | | • | WS53 series socket outlets for surface mounting |
| • | Ingress Protection: IP 53 (without flap lid) |
| • | Voltage Rating: 240 Volt AC, 2 Pole 3 Wire Grounding (2P+E) |
| • | Screw Terminals, Product Size (121x78x86)mm |
| • | Standards Australia/New Zealand: AS/NZS 3112 |
| • | Standard Color: Mist Grey (MG) (selected products available in white on special order only) |
| |
Catalog Number |
Description |
Stock |
|
Double Switched Socket Outlet, 10A, Surface Mounting, Weatherproof, IP53, Mist Grey |
|
|
Double Switched Socket Outlet, 15A, Surface Mounting, Weatherproof, IP53, Mist Grey |
23 |
|
|
|
|
|
|
|
|
Double Switched Surface Mounting Socket Outlet, IP53 | | • | Easy access to screw for quick termination of cable |
| • | Weatherprotected horse shoe switched socket outlets |
| • | Voltage Rating: 250 Volt AC, 2 Pole 3 Wire Grounding (2P+E) |
| • | Ingress Protection: IP 53 (without flap lid) |
| • | Terminals: Screw Type, Housing Material: Thermoplastic |
| • | 1x 20 mm screwed entry, 2x 20 mm flash out entries |
| • | Standard AS 60529, AS/NZS 3112, S/1 Certified |
| • | If LED indicators are required, the 56LEDK1 can be added |
| • | On/Off switch (1 or 2), Colors available: Grey (White, Cream or Terracotta on special order only) |
| |
Catalog Number |
Description |
Stock |
|
Single Switched Socket Outlet, 15A, Surface Horizontal Mounting, Weatherproof, IP53, Resistant Grey |
|
|
Double Switched Socket Outlet, 15A, Surface Horizontal Mounting, Weatherproof, IP53, Resistant Grey |
28 |
|
|
|
|
|
|
Check the catalog number on our website for additional product information. |
|
Rev. 060416 — related 900920 006 |
|
|
|
• |
Australia, New Zealand |
Rev. 300911 — related 903074 019 |
|
|
 |
 |
Single Switched Socket Outlets, IP53
Weathershield® is impact and corrosion resistant/UV protected and features a stylish new look. The single and double unit features an all-in-one switch socket mechanism that eliminates the usual forest of wires looping the socket. The weathershield® range is perfect for use in wineries, factories, exterior walls, on illuminated signs. |
|
|
Brilliant Wet Weather Performance |
Australia is a country of extremes. Scorching hot summers and lashing winter rain can quickly take its toll on outdoor switchgear. To combat the effects of the harsh Australian environment, the Weathershield® product range was developed – perfect for use in wineries, factories, exterior walls, on illuminated signs and around swimming pools. Anywhere switchgear needs protection from the elements. Weathershield® is impact and corrosion resistant/UV protected and features a stylish new look. The flush mounting models fit direct to standard pattern mounting accessories. Weathershield® has chemical resistant properties for use in food processing plants and laboratories. |
|
|
|
Surface Mounting Switched Socket Outlets Weathershield® |
Both Single and Twin Gang Outlet models are available. An extra switch variation is also available in the Twin Outlet model. The single and double unit features an all-in-one switch socket mechanism that eliminates the usual forest of wires looping the socket. There are ample entries in the base and this base is common with WSC227/2 switched sockets. Four 25mm plain, and one 25mm screwed entry as well as two 25mm rear entry cut outs and one 25mm push out for back wiring. |
Plugs, fixing screw caps and caps for cover mounting screws are provided. Screw caps must be in place to ensure maximum IP Rating. All outer mouldings are impact resistant. Overall dimensions fully assembled are 115mm x 85mm. Height from wall is 80mm. Outlet terminals accommodate 3x 2.5mm² cables. Products are Authority approved and comply with AS 60529 ′Degrees of Protection′ and all relevant tests specified to AS/NZS 3112. Mines and Energy South Australia Approval S/1. Available in chemically resistant Grey (White, Cream or Terracotta on selected items and special order only. Contact our sales office for further information). |
|
|
|
|
Single Switched Socket Outlet, IP53 | | • | Ratings: 10A or 15A, 250 Volt AC, 2 Pole 3 Wire Grounding (2P+E) |
| • | Ingress Protection: IP 53 (without flap lid) |
| • | Easy access to screw for quick termination of cable |
| • | Weatherprotected horse shoe switched socket outlets |
| • | Terminals: Screw Type, Housing Material: Thermoplastic |
| • | 1x 20 mm screwed entry, 2x 20 mm flash out entries |
| • | Standard AS 60529, AS/NZS 3112, S/1 Certified |
| • | If LED indicators are required, the 56LEDK1 can be added |
| • | On/Off single switch (1), Colors available: Grey (White, Cream or Terracotta on special order only) |
| |
Catalog Number |
Description |
Stock |
WSC227/1RG |
Single Switched Socket Outlet, 10A, 250V, Surface Horizontal Mounting, Weatherproof, IP53, Resistant Grey |
|
|
Single Switched Socket Outlet, 15A, 250V, Surface Horizontal Mounting, Weatherproof, IP53, Resistant Grey |
|
|
|
|
|
|
|
Check the catalog number on our website for additional product information. |
|
|
• |
Australia, New Zealand |
Rev. 300911 — related 903074 020 |
|
|
 |
 |
Double Switched Socket Outlets, IP53
Weathershield® is impact and corrosion resistant/UV protected and features a stylish new look. The single and double unit features an all-in-one switch socket mechanism that eliminates the usual forest of wires looping the socket. The weathershield® range is perfect for use in wineries, factories, exterior walls, on illuminated signs. |
|
|
Brilliant Wet Weather Performance |
Australia is a country of extremes. Scorching hot summers and lashing winter rain can quickly take its toll on outdoor switchgear. To combat the effects of the harsh Australian environment, the Weathershield® product range was developed – perfect for use in wineries, factories, exterior walls, on illuminated signs and around swimming pools. Anywhere switchgear needs protection from the elements. Weathershield® is impact and corrosion resistant/UV protected and features a stylish new look. The flush mounting models fit direct to standard pattern mounting accessories. Weathershield® has chemical resistant properties for use in food processing plants and laboratories. |
|
|
|
Surface Mounting Switched Socket Outlets Weathershield® |
Both Single and Twin Gang Outlet models are available. An extra switch variation is also available in the Twin Outlet model. The single and double unit features an all-in-one switch socket mechanism that eliminates the usual forest of wires looping the socket. There are ample entries in the base and this base is common with WSC227/2 switched sockets. Four 25mm plain, and one 25mm screwed entry as well as two 25mm rear entry cut outs and one 25mm push out for back wiring. |
Plugs, fixing screw caps and caps for cover mounting screws are provided. Screw caps must be in place to ensure maximum IP Rating. All outer mouldings are impact resistant. Overall dimensions fully assembled are 115mm x 85mm. Height from wall is 80mm. Outlet terminals accommodate 3x 2.5mm² cables. Products are Authority approved and comply with AS 60529 ′Degrees of Protection′ and all relevant tests specified to AS/NZS 3112. Mines and Energy South Australia Approval S/1. Available in chemically resistant Grey (White, Cream or Terracotta on selected items and special order only. Contact our sales office for further information). |
|
|
|
|
Double Switched Socket Outlet, IP53 | | • | Ratings: 10A or 15A, 250 Volt AC, 2 Pole 3 Wire Grounding (2P+E) |
| • | Ingress Protection: IP 53 (without flap lid) |
| • | Easy access to screw for quick termination of cable |
| • | Weatherprotected horse shoe switched socket outlets |
| • | Terminals: Screw Type, Housing Material: Thermoplastic |
| • | 1x 20 mm screwed entry, 2x 20 mm flash out entries |
| • | Standard AS 60529, AS/NZS 3112, S/1 Certified |
| • | If LED indicators are required, the 56LEDK1 can be added |
| • | On/Off switch (1, 2 or 3), Colors available: Grey (White, Cream or Terracotta on special order only) |
| |
Catalog Number |
Description |
Stock |
|
Double Switched Socket Outlet, 10A, 250V, Surface Horizontal Mounting, Weatherproof, IP53, Resistant Grey |
3 |
|
Double Switched Socket Outlet, 15A, 250V, Surface Horizontal Mounting, Weatherproof, IP53, Resistant Grey |
28 |
WSC227/2XRG |
Double Switched Socket Outlet, 10A, 250V, Surface Horizontal Mounting, Weatherproof, IP53, Resistant Grey, Extra Switch |
|
|
|
|
|
Check the catalog number on our website for additional product information. |
|
|
|
• |
Selected Titles of Australian and New Zealand Standards |
| |
AS 2380 | Electrical equipment for explosive atmospheres — Explosion-protection techniques |
AS 60529 | Degrees of protection provided by enclosures (IP Code) |
AS/NZS 3100 | Approval and test specification — General requirements for electrical equipment |
AS/NZS 3112 | Approval and test specification — Plugs and socket-outlets |
AS/NZS 3120 | Approval and test specification — Cord extension sockets |
AS/NZS 3121 | Approval and test specification — Insulating mouldings |
AS/NZS 3123 | Approval and test specification — Plugs, socket-outlets and couplers for general industrial application |
AS/NZS 3133 | Approval and test specification — Air-break switches |
AS/NZS 3191 | Electric flexible cords |
AS/NZS 3947 | Low-voltage switchgear and controlgear |
AS/NZS 5000 | Electric cables — Polymeric insulated |
AS/NZS 60112 | Method for the determination of the proof and the comparative tracking indice sof solid insulating materials |
AS/NZS 60320 | Appliance couplers for household and similar general purposes |
AS/NZS 60335 | Household and similar electrical appliances — Safety |
IEC 60309 | Plugs, socket-outlets and couplers for industrial purposes |
|
|
|
External WebLinks |
|
• | Standards Australia: AS/NZS 3112 — Plugs and socket-outlets ... External Weblink |
|
|
• | Standards Australia: AS/NZS 3123 — Plugs, socket-outlets and couplers for general industrial application ... External Weblink |
|
|
|
|
|
• |
|
|
| Check availability of all active Australia/New Zealand products |
Product image |
Catalog No. and Description |
|
Stock |
|
Gasket, black, (60x48x2)mm, for use with "International" Socket Outlets Series: #457, #457R, #486, #496, #496K, #496R, #496KR, #497, #497K, #497R, #497KR |
|
99 |
|
KUPPLUNG SCHWARZ 15A 250V AC, 3-PIN FLACH, AUSTRALIEN AS/NZS 3112 |
|
19 |
|
KUPPLUNG WEISS 15A 250V AC, 3-PIN FLACH, AUSTRALIEN AS/NZS 3112 |
|
60 |
|
Plug Top, Grey, 15 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Flexible PVC Cover with Cord Locking Nut, Screwed Clamp Terminals, Supplied Unassembled |
|
38 |
|
Plug Top, White, 15 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Flexible PVC Cover with Cord Locking Nut, Screwed Clamp Terminals, Supplied Unassembled |
|
84 |
|
Plug Top, Black, 10 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Flexible PVC Cover with Cord Locking Nut, Screwed Clamp Terminals, Cord Entry Hole Ø 8mm, Supplied Unassembled |
|
19 |
|
Plug Top, Clear, 10 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Flexible PVC Cover with Cord Locking Nut, Screwed Clamp Terminals, Cord Entry Hole Ø 10mm (for 15A Heavy Duty Cord), Supplied Unassembled |
|
15 |
|
Plug Top, White, 10 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Flexible PVC Cover with Cord Locking Nut, Screwed Clamp Terminals, Cord Entry Hole Ø 8mm, Supplied Unassembled |
|
30 |
|
CALL FOR AVAILABILITY -- Power Outlet Strip (Powerboard), with Overload Protection, 6 Socket Outlets, 10 Amp, 240 Volt AC, Nominal Lead Length 0.9m, Color Finish: White |
|
2 |
|
Plug Top, White, 32 Amp, 250 Volt AC, 3 Pin, U-Shaped Earth, Flat Active and Neutral, Low Profile Side Entry with 45 Degree Cord Entry and Screwed Clamp Terminals |
|
10 |
|
IP44 STECKDOSE UP 15A/250V AC 2P+E, KLAPPDECKEL, KUNSTSTOFF WEISS, AUSTRALIEN |
|
10 |
|
KUPPLUNG WEISS 2P+E 10A 250V AC, 3-PIN FLACH, AUSTRALIEN AS/NZS 3112 |
|
71 |
|
Surface Mounting Socket Outlet, 10 Amp, 250 Volt AC, Australia/New Zealand Standard AS/NZS 3112, Weatherproof IP66, Screw Terminals accepts up to 2.5mm² Wire |
|
20 |
|
Surface Mounting Block, White, 37mm Deep, Suits Powerpoints, Switches and Electronic Modules |
|
106 |
|
Quick Connect Plug, 20 Amp, 250V AC max, 2P+E (Three Pins Flat), 11mm Ø Cord Entry Size, suitable for 2.5mm² ordinary duty three core flexible cords |
|
43 |
|
Quick Connect Plug, 10 Amp, 250V AC max, 2P+E (Three Pins Flat), Insulated Active and Neutral Pins, 8mm Ø Cord Entry Size, suitable for up to 1mm² ordinary duty three core flexible cords |
|
79 |
|
Quick Connect Plug, 15 Amp, 250V AC max, 2P+E (Three Pins Flat), Insulated Active and Neutral Pins, 11mm Ø Cord Entry Size, suitable for 1.5mm² ordinary and heavy duty three core flexible cords |
|
44 |
|
Worldwide Adapter plug set (Travel plug), 2P+E, 16A/250V AC, Socket outlet: Germany "SCHUKO", includes 5 loosely plug inserts for use in: Argentina, Australia, Canada, China, Hong Kong, Italy, Japan, Mexico, Switzerland, Taiwan, United Kingdom, USA, New Zealand etc, Polyamide, white |
|
11 |
|
1x10A STECKDOSE VERTIKAL 1FACH AUSTRALIEN, 1POL SCHALTER, WEISS, (B76xH116xT28)mm |
|
10 |
|
Single Switched Socket Outlet, 250V, 10A, Australia/New Zealand Standard AS/NZS 3112, Standard Size, Horizontal Mounting, Color: White Electric |
|
5 |
|
Flush Plate, White, (114x70)mm, to suit Catalog No. 55 (AS/NZS Socket Outlets) |
|
2 |
|
Socket Outlet Module, White, 10 Amp, 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), according Argentina Standard IRAM 2071, (46W x 44.5H)mm, used in: Argentina (Similar to Australian 10A Sockets), Requires Module Snap-In Support Device |
|
24 |
|
Twin (Duplex) Switched Socket Outlet, 250V, 15A, Australia/New Zealand Standard AS/NZS 3112, Standard Size, Horizontal Mounting, Color: White Electric |
|
10 |
|
Twin (Duplex) Switched Socket Outlet, 250V, 10A, Australia/New Zealand Standard AS/NZS 3112, Standard Size, Horizontal Mounting, Color: White Electric |
|
10 |
|
1 Gang Switch, 250V/10AX, 1-way/2-way - standard size gridplate and surround complete with one 30M switch in vertical format, Color: White Electric |
|
10 |
|
Socket Outlet Module, White, 15 Amp, 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), according Australian Standard AS/NZS 3112, (46W x 44.5H)mm, used in: Australia and New Zealand, Requires Module Snap-In Support Device |
|
10 |
|
Surface Mounting Enclosure (Mounting Box) with 20mm End Entries, 1-Gang, Dimensions: Length 115mm x Width 73mm x Depth 38mm, Mounting Centres 84mm apart, Solid Plastic, Color: White Electric |
|
|
|
Surface Mounting Block, White, Weatherproof Rated IP56, Dimensions (120x75x44)mm, 41mm Inside Depth, Suits all Standard Size Excel and Standard Range Switches, Powerpoints and Electronic Modules |
|
50 |
|
Single Clear Plug Base, 15A, 250V AC, Surface Mounting, 3 Pin Flat, (Replaces P/N 37-15WE) |
|
10 |
|
Plug Base with Plate, White, 15 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Cat.No. 38/15WE Plug Base mounted on Plate Cat.No. 38/1PLWE, Screw Terminals, Mounting Centres: 95mm, Suits Standard Mounting Accessories, Plate Size: (114x70x8)mm, Can be Mounted Horizontally or Vertically, supplied with Screws and Closing Plugs, (old Cat.No. 38GF15) |
|
9 |
|
Surface Mounting Socket Outlet (Plug Base Assembly), 15 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Standard AS/NZS 3112, Overall Dimensions (121x76x48)mm, White Thermoplastic Nylon Surface Box and Plate with Receptacle, Supplied as Plug Base with Plate and Surface Mounting Box (Mounting Hardware Included) |
|
1 |
|
Plug Base with Plate, White, 20 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Cat.No. 38/20WE Plug Base mounted on Plate Cat.No. 38/1PLWE, Screw Terminals, Mounting Centres: 95mm, Suits Standard Mounting Accessories, Plate Size: (114x70x8)mm, Can be Mounted Horizontally or Vertically, supplied with Screws and Closing Plugs, (old Cat.No. 38GF20, 03813820) |
|
2 |
|
Surface Mounting Socket Outlet (Plug Base Assembly), 20 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Standard AS/NZS 3112, Overall Dimensions (121x76x48)mm, White Thermoplastic Nylon Surface Box and Plate with Receptacle, Supplied as Plug Base with Plate and Surface Mounting Box (Mounting Hardware Included) |
|
6 |
|
Replacement Front Plate Only, 15 Amp, White, 3 Pins Flat, Suits Panel Thickness of 1.2mm, Australia/New Zealand, Standard AS/NZS 3112, for use with 38-Series Plug Base Mechanism |
|
14 |
|
Plate Only, White, Suits Cat.No. 38 Series (2.5mm) Plug Bases, Mounting Centres: 95mm, Suits Standard Mounting Accessories, Plate Size: (114x70x8)mm, Can be Mounted Horizontally or Vertically, supplied with Screws and Closing Plugs, (old Cat.No. 38/1WE25, 38WEA, 38GFA, 03803800) |
|
155 |
|
Plug Base with Plate, White, 10 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Cat.No. 38WE Plug Base mounted on Plate Cat.No. 38/1PLWE, Screw Terminals, Mounting Centres: 95mm, Suits Standard Mounting Accessories, Plate Size: (114x70x8)mm, Can be Mounted Horizontally or Vertically, supplied with Screws and Closing Plugs, (old Cat.No. 38GF10, 38/110WE, 03813810) |
|
7 |
|
Plug Base for Panel or Flush Mounting, Black, 20 Amp, 250 Volt AC, 3 Pins Flat, Suits Panel Thickness of 2.5mm, Australia/New Zealand, Standard AS/NZS 3112 |
|
105 |
|
Plug Base for Panel or Flush Mounting, White, 10 Amp, 250 Volt AC, 3 Pins, Flat Earth, Round Active and Neutral, Suits Panel Thickness of 2.5mm, Australia/New Zealand, Standard AS/NZS 3112 |
|
5 |
|
Plug Base for Panel or Flush Mounting, White, 10 Amp, 250 Volt AC, 3 Pins Flat, Suits Panel Thickness of 1.5mm, Australia/New Zealand, Standard AS/NZS 3112 |
|
5 |
|
Plug Base for Panel or Flush Mounting, Black, 10 Amp, 250 Volt AC, 3 Pins Flat, Suits Panel Thickness of 2.5mm, Australia/New Zealand, Standard AS/NZS 3112 |
|
|
|
Plug Base for Panel or Flush Mounting, White, 10 Amp, 250 Volt AC, 3 Pins Flat, Suits Panel Thickness of 2.5mm, Australia/New Zealand, Standard AS/NZS 3112 |
|
81 |
|
Plug Base Mechanism Only, White, Australia/New Zealand, Standard AS/NZS 3112, for use with 38-Series Front Plate (No Frontplate included) |
|
340 |
|
Flush Mounting Socket Outlet (3-Pins Flat), Black, 10 Amp, 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), with Weatherproof Flap (IP34 with Plug Inserted), Auto-Switched |
|
10 |
|
Flush Mounting Socket Outlet (3-Pins Flat), White Electric, 10 Amp, 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), with Weatherproof Flap (IP34 with Plug Inserted), Auto-Switched |
|
10 |
|
Flush Mounting Socket Outlet (3-Pins Flat), White Electric, 15 Amp, 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), with Weatherproof Flap (IP34 with Plug Inserted), Auto-Switched |
|
10 |
|
Side Entry Plug, 10 Amp, 250 Volt AC, 3-Pins flat, Insulated active and neutral pins, Color: Black |
|
269 |
|
Side Entry Plug, 10 Amp, 250 Volt AC, 3-Pins flat, Insulated active and neutral pins, Color: White Electric |
|
81 |
|
STECKER AUSTRALIEN/NZ 20A 250V GRAU, 2P+E BIS 3x 2.5mm², (Ø44xL70)mm, KABEL Ø14.3mmMAX |
|
60 |
|
Rear Connecting Flush Mounting Socket Outlet, Color: white, 250 Volt AC max, 15 Amp max, Three flat pins, Terminal bores accommodate 4 x 2.5mm² cables |
|
5 |
|
Standard Wall Box with Sliding Nuts and Retention Clips, 1 Gang, Supplied with Pozidrive Screws for Fixing Plate to Box, Single Size (97x67x40)mm, Mounting Centres: 84mm |
|
2 |
|
Flush Mounting Socket Inlet (3-Pins Flat), Black, 15 Amp, 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), with Weatherproof Flap and Insulated Pins, IP34 with Socket Inserted (Accepts 438S15 Extension Sockets with Shroud) |
|
8 |
|
Flexible Cord Extension Socket, Transparent, 15 Amp, 250 Volt AC, 3-Pin Flat, 2-Pole 3-Wire Grounding (2P+E), Suitable for 3 core 1.5mm² ordinary duty flexible cords |
|
10 |
|
Flexible Plug, Color: black, 10 Amp, 250 Volt AC, 3 flat pins, 2-Pole 3-Wire Grounding (2P+E), cord entry size Ø 6.5 to 10.0 max, insulated active and neutral pins, with external cord grip, suitable for 0.75mm² and 1.00mm² ordinary duty three core flexible cords |
|
270 |
|
STECKER KLAR AUSTRALIEN 10A 250V AC, 2P+E, AS/NZS 3112, KABEL Ø (6.5-10.0)mm MAX |
|
10 |
|
Insulating back plate to suit 449A mounting block, Dimensions: Length 126mm x Width 84mm x Depth 10mm, Color: White Electric |
|
40 |
|
Surface Mounting Block for 2000 Series, six mounting positions and twelve combined cable/conduit cut-outs. Dimensions: Length 122mm x Width 80mm x Depth 34mm (Mounting Centres 84mm apart), Color: White Electric |
|
40 |
|
Single Socket Outlet, Flush Mounting (for use with Countersunk Screws), 10 Amp, 250 Volt AC, 2-pole 3-wire grounded (2P+E), with Hinged lid Self closing (IP44), Australia/New Zealand standard AS/NZS 3112, with Screw Terminals for up to 1.5mm², Thermoplastic black (Polyamide), RoHS Compliant |
|
82 |
|
DIN-Rail Mounting Socket Outlet, 10 Amp, 250 Volt AC, 3-Pins Flat, Automatic Switch Socket Double Pole, No Color Option, 2.5 Modules Wide, Terminals accept up to 16mm² Copper Conductors, Australia/New Zealand Standard, other Ref. 4PS010D |
|
13 |
|
DIN-Rail Mounting Socket Outlet, 15 Amp, 250 Volt AC, 3-Pins Flat, Automatic Switch Socket Double Pole, No Color Option, 2.5 Modules Wide, Terminals accept up to 16mm² Copper Conductors, Australia/New Zealand Standard, other Ref. 4PS015D, (Replaces P/N 107995 4SO15D) |
|
37 |
|
DIN-Rail Mounting Socket Outlet, 20 Amp, 250 Volt AC, 3-Pins Flat, Automatic Switch Socket Double Pole, No Color Option, 2.5 Modules Wide, Terminals accept up to 16mm² Copper Conductors, Australia/New Zealand Standard |
|
5 |
|
Mains Line Plug with Grounding Contact, black, Rewireable, 10 Amp 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), Straight Cable entry with Strain relief sleeve, Glass Fibre Reinforced PA/PBT, Screw Terminals, according AS/NZS 3112:2000 |
|
120 |
|
STECKDOSE 10A-250V BRAUN |
|
2 |
|
Flush-Mounting Socket Outlet, Black, 10A, 250V AC, 3 Flat Pins, AS/NZS, suitable for USA Standard Boxes |
|
30 |
|
Flush-Mounting Socket Outlet, White, 10A, 250V AC, 3 Flat Pins, AS/NZS, suitable for USA Standard Boxes |
|
35 |
|
Unswitched Socket Outlet, 250 Volt AC 1-Phase 50Hz, 10 Amp, 3 Pins Flat (2P+E), IP66, Surface Mounting, 30mA RCD Protected, General Industrial Grey |
|
2 |
|
Double Pole Switched Socket Outlet, 250 Volt AC 1-Phase 50Hz, 15 Amp, 3 Pins Flat (2P+E), IP66, Surface Mounting, General Industrial Grey |
|
5 |
|
Industrial Plug Top, 3 Flat Pin (1P+N+PE), 10 Amp, 250 Volt AC, AS/NZS 3112, IP66 conforming to AS 60529, Polycarbonate Housing, Straight Cord Entry (Dia 7 to 12.5)mm, Conductor Screw Terminals, Electric Orange - Transparent Body, older Ref: 56P310SEO |
|
10 |
|
Industrial Straight Plug, 20A, 500V AC, 5 Round Pins, IP66, Electric Orange |
|
|
|
Surface Mounting Industrial Socket Outlet, 10 Amp, Grey, 250 Volt AC, 3 Pins Flat, 2P+E, Rated IP66 (if used with applicable plug), Dimensions (107Hx101Wx77D)mm, Australia/New Zealand AS/NZS 3123, with Back Box |
|
|
|
Industrial Socket Outlet, 10 Amp, Grey, 250 Volt AC, 3 Pins Flat, 2P+E, Rated IP66 (if used with applicable plug), Dimensions (101Hx101W)mm, Australia/New Zealand AS/NZS 3123, without Back Box (Less Enclosure) |
|
24 |
|
Industrial Socket Outlet, 15 Amp, Grey, 250 Volt AC, 3 Pins Flat, 2P+E, Rated IP66 (if used with applicable plug), Dimensions (101Hx101W)mm, Australia/New Zealand AS/NZS 3123, without Back Box (Less Enclosure) |
|
1 |
|
Industrial Socket Outlet, 15 Amp, Grey, 250 Volt AC, 3 Pins Flat, 2P+E, Rated IP66 (if used with applicable plug), Dimensions (101Hx101W)mm, Australia/New Zealand AS/NZS 3123, without Back Box (Less Enclosure) |
|
44 |
|
IP66 STECKDOSE 10A 500V AC AUFPUTZ, 5 PIN RUND, FARBE GRAU, OHNE AUFPUTZGEHÄUSE |
|
7 |
|
IP66 STECKDOSE 20A 500V AC AUFPUTZ, 5 PIN RUND, FARBE GRAU, OHNE AUFPUTZGEHÄUSE |
|
5 |
|
Modular Socket Outlet, Australia/New Zealand, Color: White, 10/15 Amp, 2P+E, Meets AS/NZS 3112, Screw Terminals, Module Face Size (45x45)mm, Ref. AR787/15AMWE |
|
22 |
|
Modular Socket Outlet, Australia/New Zealand, Color: White, 10 Amp, 2P+E, Meets AS/NZS 3112, Screw Terminals, Module Face Size (45x45)mm, Ref. AR787AMWE |
|
57 |
|
STECKDOSE |
|
2 |
|
Flat Travel Plug Adapter, White, 2 Pole 2 Wire Non-Grounding, 250V AC, 10-16A max, Flat Pins according AS/NZS (Australia, New Zealand, China, Argentina, etc), Combination Socket EURO/NEMA 1-15P |
|
2 |
|
Modular Socket Outlet, Australia/New Zealand, Color: White, 10 Amp, 2P+E, Meets AS/NZS 3112, Screw Terminals, Module Face Size (45x45)mm |
|
10 |
|
Double Switched Powerpoint, 15 Amp, 240 Volt AC, 2-Pole 3-Wire Grounding (2P+E), Color: white, Plate Size (70x114)mm |
|
10 |
|
Double Switched Powerpoint, 10 Amp, 240 Volt AC, 2-Pole 3-Wire Grounding (2P+E), Color: white, Plate Size (70x114)mm |
|
40 |
|
Single Switched Powerpoint, 15A, 240Vac, White, Plate Size (70x114)mm |
|
38 |
|
Single Switched Powerpoint, 20A, 240Vac, White, Plate Size (70x114)mm |
|
16 |
|
Single Switched Powerpoint, 32A, 240Vac, White, Plate Size (70x114)mm |
|
10 |
|
DIN SCHIENEN STECKDOSE 15A 240VAC, SCHALTER + HALTERUNG (35x7.5)mm, AUSTRALIEN/NZ |
|
1 |
|
Extension Socket (Connector), 15 Amp, 250 Volt AC, Black Flexible PVC Cover with Safety Skrit, Cord Locking Nut, Screw Terminals, Cord Entry Hole Dia. 10mm, 2-Pole 3-Wire Grounding (2P+E), 3 Pin Flat, Australia/New Zealand Standard, (Former Cat.No. 7P15BK) |
|
2 |
|
Extension Socket (Connector), 15 Amp, 250 Volt AC, White Flexible PVC Cover with Safety Skrit, Cord Locking Nut, Screw Terminals, Cord Entry Hole Dia. 10mm, 2-Pole 3-Wire Grounding (2P+E), 3 Pin Flat, Australia/New Zealand Standard, (Former Cat.No. 7P15) |
|
100 |
|
Extension Socket (Connector), 10 Amp, 250 Volt AC, Black Flexible PVC Cover with Safety Skrit, Cord Locking Nut, Screw Terminals, Cord Entry Hole Dia. 8mm, 2-Pole 3-Wire Grounding (2P+E), 3 Pin Flat, Australia/New Zealand Standard, (Former Cat.No. 7P10BK) |
|
249 |
|
Extension Socket (Connector), 10 Amp, 250 Volt AC, White Flexible PVC Cover with Safety Skrit, Cord Locking Nut, Screw Terminals, Cord Entry Hole Dia. 8mm, 2-Pole 3-Wire Grounding (2P+E), 3 Pin Flat, Australia/New Zealand Standard, (Former Cat.No. 7P10) |
|
10 |
|
Non-Detachable Power Supply Cord, Length 2.5m, Wire Type H05VV-F3G1.00mm² with Black Jacket, Black Straight Molded 10A Plug UC-822 (AS/NZS 3112) 3-Pin Flat (2P+E), 2.End 50/12mm ROJ stripped and twisted |
|
17 |
|
Non-Detachable Power Supply Cord, Length 2.5m, Wire Type H03VV-H2F 2x0.75mm² with Black Jacket, Black Straight Molded 10A Plug (Rated 7.5A) UC-821 (AS/NZS 3112) 2-Pin Flat not grounded (2POL), 2.End 50/12mm ROJ stripped and twisted |
|
99 |
|
Detachable Power Supply Cordset, Length 1.8m, Wire Type: H03VVH2-F2x0.75mm² with Black Jacket, Black Straight Molded 10A Plug YP-36 (AS/NZS 3112:2000) 2-Pin Flat (2POL), Black Straight Molded 2.5A Appliance Connector YC-13 (IEC 60320/C7) |
|
20 |
|
Detachable Power Supply Cordset, Length 1.8m, Wire Type: H05VV-F3G0.75mm² with Black Jacket, Black Straight Molded 10A Plug YP-35 (AS/NZS 3112:2000) 3-Pin Flat (2P+E), Black Straight Molded 10A Appliance Connector YC-12 (IEC 60320/C13) |
|
26 |
|
Detachable Power Supply Cordset, Length 1.8m, Wire Type: H05VV-F3G0.75mm² with Black Jacket, Black Straight Molded 10A Plug YP-35 (AS/NZS 3112:2000) 3-Pin Flat (2P+E), Black Straight Molded 2.5A Appliance Connector YC-14 (IEC 60320/C5) |
|
72 |
|
Plug Top, White, 20 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Large Finger-Grip, Rigid, Impact-Resistant Moulding |
|
9 |
|
Rewireable Standard Plug, Side Entry, 3-Pin Flat, 15 Amp, 230 to 240 Volt AC, Heavy Duty, with Insulated Pins, Complies with AS/NZS 3112:2000, Housing Color: Black |
|
124 |
|
Heavy Duty Back Entry Plug, 15 Amp, 230-240 Volt AC (250V max), 2-Pole 3-Wire Grounding (2P+E), Partial insulated Line and Neutral Pins, Complies with AS/NZS 3112:2000 and AS/NZS 3100, Cable Outer Dia. 9mm max, Color: white |
|
39 |
|
Heavy Duty Back Entry Plug, 10 Amp, 230-240 Volt AC (250V max), 2-Pole 3-Wire Grounding (2P+E), Partial insulated Line and Neutral Pins, Complies with AS/NZS 3112:2000 and AS/NZS 3100, Cable Outer Dia. 9mm max, Color: black |
|
86 |
|
Heavy Duty Back Entry Plug, 10 Amp, 230-240 Volt AC (250V max), 2-Pole 3-Wire Grounding (2P+E), Partial insulated Line and Neutral Pins, Complies with AS/NZS 3112:2000 and AS/NZS 3100, Cable Outer Dia. 9mm max, Color: white |
|
77 |
|
Plug Top, White, 10 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Large Finger-Grip, Rigid, Impact-Resistant Moulding, AS/NZS 3112:2000 |
|
209 |
|
Single Switched Socket Outlet, 250V, 10A, Double Pole Switched, Australia/New Zealand Standard AS/NZS 3112, Classic Series, Vertical Mounting, Color: White Electric |
|
10 |
|
2.5m ZULEITUNG AUSTRALIEN 10A PLUG AS3112/NZS, ROJ 50/5mm, BLACK, H05VV-F3G1.00mm² |
|
|
|
Power Outlet Strip (Powerboard), with Overload Protection, 4 Socket Outlets, 10 Amp, 240 Volt AC, Nominal Lead Length 1.8m, Color Finish: White |
|
4 |
|
Power Outlet Strip (Powerboard), with Overload Protection, 8 Socket Outlets with 150J Surge Protection, 10 Amp, 240 Volt AC, Nominal Lead Length 1.8m, Color Finish: White |
|
3 |
|
3POL ADAPTER USA 5-15P: AUS 2P+E, STIFTE USA NEMA 5-15P, AUSTRALIEN BUCHSE "250V"10A |
|
20 |
|
Travel Adaptor, Pins CEE 7/7 Ø 4mm (used in Germany, France, Belgium, Poland, etc.), Socket Type I 10A (used in Argentina, Australia, China, etc.) |
|
68 |
|
3POL ADAPTER U.K. : AUS 10A STIFTE UK (WIE BS1363 13A), AUSTRALIEN BUCHSE "250V"10A |
|
20 |
|
Surface Mounting Combination AS/NZS 3112, 10A, 240V ac, 3 pin flat, 1 pole switch, 1.1kW, IP66, Quick secure 1/4 turn flap, Complete with adaptors for M25 and M20 plain conduit. 2 module size, Blue |
|
5 |
|
Horizontal mechanism, Black, for 15A 240v a.c. powerpoint |
|
2 |
|
Weatherproof Socket Outlet IP54, SAA Standard Model 1037 (Panel Mount Type), Flange Mount (50x50)mm, suitable for 10 Amp + 15 Amp Plugs, 250 Volt AC max, IEC Type I, AS/NZS 3112 and 3100, Device Color: Black |
|
|
|
Weatherproof Single Socket Outlet (Receptacle), IP53, 15 Amp, 240 Volt AC, 2-Pole 3-Wire Grounding (2P+E), 3-Pins Flat, Surface Mounting, with Flap to cover Outlet, Side Operating Lever for ON/OFF Switch, Padlockable, AQUA Weatherproof Range Powerpoints, Color: Mist Grey (Black Socket) |
|
5 |
|
Double Switched Socket Outlet, 15A, Surface Mounting, Weatherproof, IP53, Mist Grey |
|
23 |
|
Double Surface Mounting Switched Socket Outlet, 15 Amp, 250 Volt AC, Resistant Grey, Weather Protected, Weathershield, IP53 |
|
28 |
|
Double Surface Mounting Switched Socket Outlet, 10 Amp, 250 Volt AC, Resistant Grey, Weather Protected, Weathershield, IP53 |
|
3 |
|
Single Surface Mounting Switched Socket Outlet, 15 Amp, 250 Volt AC, Resistant Grey, Weather Protected, Weathershield, IP54, with Hinge Flap |
|
1 |
|
Electresafe™ Double Powerpoint, White, 10mA tripping, 230V to 240V AC (50Hz), 3 Neons and 10 Amp outlets (Australia/New Zealand), Plate size: (Width 117 x Height 73)mm, Mounting centres: 84mm, For Hospital applications and hazardous environments |
|
1 |
|
Molded Plug Adapter, Black, 10A/250V, 2P+E, Straight, Pins NEMA 5-15P (USA, Canada, Mexico, Japan, Taiwan), Socket AS/NZS 3112 (Australia, New Zealand) |
|
|
|
Molded Adapter Plug, 2.5A, 250V AC, straight, black, Plug pins Korea KSC 8305 (Pin Diameter 4.8mm), Australia/New Zealand AS/NZS 3112 (Socket Outlet) |
|
|
|
Molded Adapter Plug, 10A, 250V AC, straight, black, Plug pins CEE 7/7 (France, Belgium, Poland, Germany, etc), Australia/New Zealand AS/NZS 3112 (Socket Outlet) |
|
20 |
|
Molded Adapter Plug, 10A, 250V AC, straight, black, Plug pins Australia AS/NZS 3112, IEC60320/C13 (Socket Outlet) |
|
|
|
Molded Adapter Plug, 10A, 250V AC, straight, black, Plug pins Australia AS/NZS 3112, Europe/Germany CEE7/4 (Socket Outlet) |
|
581 |
|
Molded Adapter Plug, 2.5A, 250V AC, straight, black, Plug pins Australia AS/NZS 3112, "Europlug-Receptacle" (Socket Outlet) |
|
|
|
Select desired product above to get further informations. Non stock products have a minimum order quantity. |
|
|
|
• |
|
|
| Check stock inventory of Australia Mains Plugs only |
Product image |
Catalog No. and Description |
|
Stock |
|
Plug Top, Grey, 15 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Flexible PVC Cover with Cord Locking Nut, Screwed Clamp Terminals, Supplied Unassembled |
|
38 |
|
Plug Top, White, 15 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Flexible PVC Cover with Cord Locking Nut, Screwed Clamp Terminals, Supplied Unassembled |
|
84 |
|
Plug Top, Black, 10 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Flexible PVC Cover with Cord Locking Nut, Screwed Clamp Terminals, Cord Entry Hole Ø 8mm, Supplied Unassembled |
|
19 |
|
Plug Top, Clear, 10 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Flexible PVC Cover with Cord Locking Nut, Screwed Clamp Terminals, Cord Entry Hole Ø 10mm (for 15A Heavy Duty Cord), Supplied Unassembled |
|
15 |
|
Plug Top, White, 10 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Flexible PVC Cover with Cord Locking Nut, Screwed Clamp Terminals, Cord Entry Hole Ø 8mm, Supplied Unassembled |
|
30 |
|
Plug Top, White, 32 Amp, 250 Volt AC, 3 Pin, U-Shaped Earth, Flat Active and Neutral, Low Profile Side Entry with 45 Degree Cord Entry and Screwed Clamp Terminals |
|
10 |
|
Quick Connect Plug, 20 Amp, 250V AC max, 2P+E (Three Pins Flat), 11mm Ø Cord Entry Size, suitable for 2.5mm² ordinary duty three core flexible cords |
|
43 |
|
Quick Connect Plug, 10 Amp, 250V AC max, 2P+E (Three Pins Flat), Insulated Active and Neutral Pins, 8mm Ø Cord Entry Size, suitable for up to 1mm² ordinary duty three core flexible cords |
|
79 |
|
Quick Connect Plug, 15 Amp, 250V AC max, 2P+E (Three Pins Flat), Insulated Active and Neutral Pins, 11mm Ø Cord Entry Size, suitable for 1.5mm² ordinary and heavy duty three core flexible cords |
|
44 |
|
Side Entry Plug, 10 Amp, 250 Volt AC, 3-Pins flat, Insulated active and neutral pins, Color: Black |
|
269 |
|
Side Entry Plug, 10 Amp, 250 Volt AC, 3-Pins flat, Insulated active and neutral pins, Color: White Electric |
|
81 |
|
STECKER AUSTRALIEN/NZ 20A 250V GRAU, 2P+E BIS 3x 2.5mm², (Ø44xL70)mm, KABEL Ø14.3mmMAX |
|
60 |
|
Flush Mounting Socket Inlet (3-Pins Flat), Black, 15 Amp, 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), with Weatherproof Flap and Insulated Pins, IP34 with Socket Inserted (Accepts 438S15 Extension Sockets with Shroud) |
|
8 |
|
Flexible Plug, Color: black, 10 Amp, 250 Volt AC, 3 flat pins, 2-Pole 3-Wire Grounding (2P+E), cord entry size Ø 6.5 to 10.0 max, insulated active and neutral pins, with external cord grip, suitable for 0.75mm² and 1.00mm² ordinary duty three core flexible cords |
|
270 |
|
STECKER KLAR AUSTRALIEN 10A 250V AC, 2P+E, AS/NZS 3112, KABEL Ø (6.5-10.0)mm MAX |
|
10 |
|
Mains Line Plug with Grounding Contact, black, Rewireable, 10 Amp 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), Straight Cable entry with Strain relief sleeve, Glass Fibre Reinforced PA/PBT, Screw Terminals, according AS/NZS 3112:2000 |
|
120 |
|
Industrial Plug Top, 3 Flat Pin (1P+N+PE), 10 Amp, 250 Volt AC, AS/NZS 3112, IP66 conforming to AS 60529, Polycarbonate Housing, Straight Cord Entry (Dia 7 to 12.5)mm, Conductor Screw Terminals, Electric Orange - Transparent Body, older Ref: 56P310SEO |
|
10 |
|
Non-Detachable Power Supply Cord, Length 2.5m, Wire Type H05VV-F3G1.00mm² with Black Jacket, Black Straight Molded 10A Plug UC-822 (AS/NZS 3112) 3-Pin Flat (2P+E), 2.End 50/12mm ROJ stripped and twisted |
|
17 |
|
Non-Detachable Power Supply Cord, Length 2.5m, Wire Type H03VV-H2F 2x0.75mm² with Black Jacket, Black Straight Molded 10A Plug (Rated 7.5A) UC-821 (AS/NZS 3112) 2-Pin Flat not grounded (2POL), 2.End 50/12mm ROJ stripped and twisted |
|
99 |
|
Detachable Power Supply Cordset, Length 1.8m, Wire Type: H03VVH2-F2x0.75mm² with Black Jacket, Black Straight Molded 10A Plug YP-36 (AS/NZS 3112:2000) 2-Pin Flat (2POL), Black Straight Molded 2.5A Appliance Connector YC-13 (IEC 60320/C7) |
|
20 |
|
Detachable Power Supply Cordset, Length 1.8m, Wire Type: H05VV-F3G0.75mm² with Black Jacket, Black Straight Molded 10A Plug YP-35 (AS/NZS 3112:2000) 3-Pin Flat (2P+E), Black Straight Molded 10A Appliance Connector YC-12 (IEC 60320/C13) |
|
26 |
|
Plug Top, White, 20 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Large Finger-Grip, Rigid, Impact-Resistant Moulding |
|
9 |
|
Rewireable Standard Plug, Side Entry, 3-Pin Flat, 15 Amp, 230 to 240 Volt AC, Heavy Duty, with Insulated Pins, Complies with AS/NZS 3112:2000, Housing Color: Black |
|
124 |
|
Heavy Duty Back Entry Plug, 15 Amp, 230-240 Volt AC (250V max), 2-Pole 3-Wire Grounding (2P+E), Partial insulated Line and Neutral Pins, Complies with AS/NZS 3112:2000 and AS/NZS 3100, Cable Outer Dia. 9mm max, Color: white |
|
39 |
|
Heavy Duty Back Entry Plug, 10 Amp, 230-240 Volt AC (250V max), 2-Pole 3-Wire Grounding (2P+E), Partial insulated Line and Neutral Pins, Complies with AS/NZS 3112:2000 and AS/NZS 3100, Cable Outer Dia. 9mm max, Color: black |
|
86 |
|
Heavy Duty Back Entry Plug, 10 Amp, 230-240 Volt AC (250V max), 2-Pole 3-Wire Grounding (2P+E), Partial insulated Line and Neutral Pins, Complies with AS/NZS 3112:2000 and AS/NZS 3100, Cable Outer Dia. 9mm max, Color: white |
|
77 |
|
Plug Top, White, 10 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Rewirable, Large Finger-Grip, Rigid, Impact-Resistant Moulding, AS/NZS 3112:2000 |
|
209 |
|
Select desired product above to get further informations. Non stock products have a minimum order quantity. |
|
|
|
• |
|
|
| Check stock inventory of Australia Cord Extension Connectors only |
Product image |
Catalog No. and Description |
|
Stock |
|
KUPPLUNG SCHWARZ 15A 250V AC, 3-PIN FLACH, AUSTRALIEN AS/NZS 3112 |
|
19 |
|
KUPPLUNG WEISS 15A 250V AC, 3-PIN FLACH, AUSTRALIEN AS/NZS 3112 |
|
60 |
|
KUPPLUNG WEISS 2P+E 10A 250V AC, 3-PIN FLACH, AUSTRALIEN AS/NZS 3112 |
|
71 |
|
Flexible Cord Extension Socket, Transparent, 15 Amp, 250 Volt AC, 3-Pin Flat, 2-Pole 3-Wire Grounding (2P+E), Suitable for 3 core 1.5mm² ordinary duty flexible cords |
|
10 |
|
Extension Socket (Connector), 15 Amp, 250 Volt AC, Black Flexible PVC Cover with Safety Skrit, Cord Locking Nut, Screw Terminals, Cord Entry Hole Dia. 10mm, 2-Pole 3-Wire Grounding (2P+E), 3 Pin Flat, Australia/New Zealand Standard, (Former Cat.No. 7P15BK) |
|
2 |
|
Extension Socket (Connector), 15 Amp, 250 Volt AC, White Flexible PVC Cover with Safety Skrit, Cord Locking Nut, Screw Terminals, Cord Entry Hole Dia. 10mm, 2-Pole 3-Wire Grounding (2P+E), 3 Pin Flat, Australia/New Zealand Standard, (Former Cat.No. 7P15) |
|
100 |
|
Extension Socket (Connector), 10 Amp, 250 Volt AC, Black Flexible PVC Cover with Safety Skrit, Cord Locking Nut, Screw Terminals, Cord Entry Hole Dia. 8mm, 2-Pole 3-Wire Grounding (2P+E), 3 Pin Flat, Australia/New Zealand Standard, (Former Cat.No. 7P10BK) |
|
249 |
|
Extension Socket (Connector), 10 Amp, 250 Volt AC, White Flexible PVC Cover with Safety Skrit, Cord Locking Nut, Screw Terminals, Cord Entry Hole Dia. 8mm, 2-Pole 3-Wire Grounding (2P+E), 3 Pin Flat, Australia/New Zealand Standard, (Former Cat.No. 7P10) |
|
10 |
|
Select desired product above to get further informations. Non stock products have a minimum order quantity. |
|
|
|
• |
|
|
| Check stock inventory of Australia/New Zealand Socket Outlets only |
Product image |
Catalog No. and Description |
|
Stock |
|
Gasket, black, (60x48x2)mm, for use with "International" Socket Outlets Series: #457, #457R, #486, #496, #496K, #496R, #496KR, #497, #497K, #497R, #497KR |
|
99 |
|
CALL FOR AVAILABILITY -- Power Outlet Strip (Powerboard), with Overload Protection, 6 Socket Outlets, 10 Amp, 240 Volt AC, Nominal Lead Length 0.9m, Color Finish: White |
|
2 |
|
IP44 STECKDOSE UP 15A/250V AC 2P+E, KLAPPDECKEL, KUNSTSTOFF WEISS, AUSTRALIEN |
|
10 |
|
Surface Mounting Socket Outlet, 10 Amp, 250 Volt AC, Australia/New Zealand Standard AS/NZS 3112, Weatherproof IP66, Screw Terminals accepts up to 2.5mm² Wire |
|
20 |
|
1x10A STECKDOSE VERTIKAL 1FACH AUSTRALIEN, 1POL SCHALTER, WEISS, (B76xH116xT28)mm |
|
10 |
|
Single Switched Socket Outlet, 250V, 10A, Australia/New Zealand Standard AS/NZS 3112, Standard Size, Horizontal Mounting, Color: White Electric |
|
5 |
|
Flush Plate, White, (114x70)mm, to suit Catalog No. 55 (AS/NZS Socket Outlets) |
|
2 |
|
Socket Outlet Module, White, 10 Amp, 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), according Argentina Standard IRAM 2071, (46W x 44.5H)mm, used in: Argentina (Similar to Australian 10A Sockets), Requires Module Snap-In Support Device |
|
24 |
|
Twin (Duplex) Switched Socket Outlet, 250V, 15A, Australia/New Zealand Standard AS/NZS 3112, Standard Size, Horizontal Mounting, Color: White Electric |
|
10 |
|
Twin (Duplex) Switched Socket Outlet, 250V, 10A, Australia/New Zealand Standard AS/NZS 3112, Standard Size, Horizontal Mounting, Color: White Electric |
|
10 |
|
Socket Outlet Module, White, 15 Amp, 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), according Australian Standard AS/NZS 3112, (46W x 44.5H)mm, used in: Australia and New Zealand, Requires Module Snap-In Support Device |
|
10 |
|
Single Clear Plug Base, 15A, 250V AC, Surface Mounting, 3 Pin Flat, (Replaces P/N 37-15WE) |
|
10 |
|
Plug Base with Plate, White, 15 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Cat.No. 38/15WE Plug Base mounted on Plate Cat.No. 38/1PLWE, Screw Terminals, Mounting Centres: 95mm, Suits Standard Mounting Accessories, Plate Size: (114x70x8)mm, Can be Mounted Horizontally or Vertically, supplied with Screws and Closing Plugs, (old Cat.No. 38GF15) |
|
9 |
|
Surface Mounting Socket Outlet (Plug Base Assembly), 15 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Standard AS/NZS 3112, Overall Dimensions (121x76x48)mm, White Thermoplastic Nylon Surface Box and Plate with Receptacle, Supplied as Plug Base with Plate and Surface Mounting Box (Mounting Hardware Included) |
|
1 |
|
Plug Base with Plate, White, 20 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Cat.No. 38/20WE Plug Base mounted on Plate Cat.No. 38/1PLWE, Screw Terminals, Mounting Centres: 95mm, Suits Standard Mounting Accessories, Plate Size: (114x70x8)mm, Can be Mounted Horizontally or Vertically, supplied with Screws and Closing Plugs, (old Cat.No. 38GF20, 03813820) |
|
2 |
|
Surface Mounting Socket Outlet (Plug Base Assembly), 20 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Standard AS/NZS 3112, Overall Dimensions (121x76x48)mm, White Thermoplastic Nylon Surface Box and Plate with Receptacle, Supplied as Plug Base with Plate and Surface Mounting Box (Mounting Hardware Included) |
|
6 |
|
Replacement Front Plate Only, 15 Amp, White, 3 Pins Flat, Suits Panel Thickness of 1.2mm, Australia/New Zealand, Standard AS/NZS 3112, for use with 38-Series Plug Base Mechanism |
|
14 |
|
Plate Only, White, Suits Cat.No. 38 Series (2.5mm) Plug Bases, Mounting Centres: 95mm, Suits Standard Mounting Accessories, Plate Size: (114x70x8)mm, Can be Mounted Horizontally or Vertically, supplied with Screws and Closing Plugs, (old Cat.No. 38/1WE25, 38WEA, 38GFA, 03803800) |
|
155 |
|
Plug Base with Plate, White, 10 Amp, 250 Volt AC, 3 Pins Flat, 2-Pole 3-Wire Grounding (2P+E), Cat.No. 38WE Plug Base mounted on Plate Cat.No. 38/1PLWE, Screw Terminals, Mounting Centres: 95mm, Suits Standard Mounting Accessories, Plate Size: (114x70x8)mm, Can be Mounted Horizontally or Vertically, supplied with Screws and Closing Plugs, (old Cat.No. 38GF10, 38/110WE, 03813810) |
|
7 |
|
Plug Base for Panel or Flush Mounting, Black, 20 Amp, 250 Volt AC, 3 Pins Flat, Suits Panel Thickness of 2.5mm, Australia/New Zealand, Standard AS/NZS 3112 |
|
105 |
|
Plug Base for Panel or Flush Mounting, White, 10 Amp, 250 Volt AC, 3 Pins, Flat Earth, Round Active and Neutral, Suits Panel Thickness of 2.5mm, Australia/New Zealand, Standard AS/NZS 3112 |
|
5 |
|
Plug Base for Panel or Flush Mounting, White, 10 Amp, 250 Volt AC, 3 Pins Flat, Suits Panel Thickness of 1.5mm, Australia/New Zealand, Standard AS/NZS 3112 |
|
5 |
|
Plug Base for Panel or Flush Mounting, White, 10 Amp, 250 Volt AC, 3 Pins Flat, Suits Panel Thickness of 2.5mm, Australia/New Zealand, Standard AS/NZS 3112 |
|
81 |
|
Plug Base Mechanism Only, White, Australia/New Zealand, Standard AS/NZS 3112, for use with 38-Series Front Plate (No Frontplate included) |
|
340 |
|
Flush Mounting Socket Outlet (3-Pins Flat), Black, 10 Amp, 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), with Weatherproof Flap (IP34 with Plug Inserted), Auto-Switched |
|
10 |
|
Flush Mounting Socket Outlet (3-Pins Flat), White Electric, 10 Amp, 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), with Weatherproof Flap (IP34 with Plug Inserted), Auto-Switched |
|
10 |
|
Flush Mounting Socket Outlet (3-Pins Flat), White Electric, 15 Amp, 250 Volt AC, 2-Pole 3-Wire Grounding (2P+E), with Weatherproof Flap (IP34 with Plug Inserted), Auto-Switched |
|
10 |
|
Rear Connecting Flush Mounting Socket Outlet, Color: white, 250 Volt AC max, 15 Amp max, Three flat pins, Terminal bores accommodate 4 x 2.5mm² cables |
|
5 |
|
Single Socket Outlet, Flush Mounting (for use with Countersunk Screws), 10 Amp, 250 Volt AC, 2-pole 3-wire grounded (2P+E), with Hinged lid Self closing (IP44), Australia/New Zealand standard AS/NZS 3112, with Screw Terminals for up to 1.5mm², Thermoplastic black (Polyamide), RoHS Compliant |
|
82 |
|
DIN-Rail Mounting Socket Outlet, 10 Amp, 250 Volt AC, 3-Pins Flat, Automatic Switch Socket Double Pole, No Color Option, 2.5 Modules Wide, Terminals accept up to 16mm² Copper Conductors, Australia/New Zealand Standard, other Ref. 4PS010D |
|
13 |
|
DIN-Rail Mounting Socket Outlet, 15 Amp, 250 Volt AC, 3-Pins Flat, Automatic Switch Socket Double Pole, No Color Option, 2.5 Modules Wide, Terminals accept up to 16mm² Copper Conductors, Australia/New Zealand Standard, other Ref. 4PS015D, (Replaces P/N 107995 4SO15D) |
|
37 |
|
DIN-Rail Mounting Socket Outlet, 20 Amp, 250 Volt AC, 3-Pins Flat, Automatic Switch Socket Double Pole, No Color Option, 2.5 Modules Wide, Terminals accept up to 16mm² Copper Conductors, Australia/New Zealand Standard |
|
5 |
|
STECKDOSE 10A-250V BRAUN |
|
2 |
|
Flush-Mounting Socket Outlet, Black, 10A, 250V AC, 3 Flat Pins, AS/NZS, suitable for USA Standard Boxes |
|
30 |
|
Flush-Mounting Socket Outlet, White, 10A, 250V AC, 3 Flat Pins, AS/NZS, suitable for USA Standard Boxes |
|
35 |
|
Unswitched Socket Outlet, 250 Volt AC 1-Phase 50Hz, 10 Amp, 3 Pins Flat (2P+E), IP66, Surface Mounting, 30mA RCD Protected, General Industrial Grey |
|
2 |
|
Double Pole Switched Socket Outlet, 250 Volt AC 1-Phase 50Hz, 15 Amp, 3 Pins Flat (2P+E), IP66, Surface Mounting, General Industrial Grey |
|
5 |
|
Industrial Socket Outlet, 10 Amp, Grey, 250 Volt AC, 3 Pins Flat, 2P+E, Rated IP66 (if used with applicable plug), Dimensions (101Hx101W)mm, Australia/New Zealand AS/NZS 3123, without Back Box (Less Enclosure) |
|
24 |
|
Industrial Socket Outlet, 15 Amp, Grey, 250 Volt AC, 3 Pins Flat, 2P+E, Rated IP66 (if used with applicable plug), Dimensions (101Hx101W)mm, Australia/New Zealand AS/NZS 3123, without Back Box (Less Enclosure) |
|
1 |
|
Industrial Socket Outlet, 15 Amp, Grey, 250 Volt AC, 3 Pins Flat, 2P+E, Rated IP66 (if used with applicable plug), Dimensions (101Hx101W)mm, Australia/New Zealand AS/NZS 3123, without Back Box (Less Enclosure) |
|
44 |
|
IP66 STECKDOSE 10A 500V AC AUFPUTZ, 5 PIN RUND, FARBE GRAU, OHNE AUFPUTZGEHÄUSE |
|
7 |
|
IP66 STECKDOSE 20A 500V AC AUFPUTZ, 5 PIN RUND, FARBE GRAU, OHNE AUFPUTZGEHÄUSE |
|
5 |
|
Modular Socket Outlet, Australia/New Zealand, Color: White, 10/15 Amp, 2P+E, Meets AS/NZS 3112, Screw Terminals, Module Face Size (45x45)mm, Ref. AR787/15AMWE |
|
22 |
|
Modular Socket Outlet, Australia/New Zealand, Color: White, 10 Amp, 2P+E, Meets AS/NZS 3112, Screw Terminals, Module Face Size (45x45)mm, Ref. AR787AMWE |
|
57 |
|
STECKDOSE |
|
2 |
|
Modular Socket Outlet, Australia/New Zealand, Color: White, 10 Amp, 2P+E, Meets AS/NZS 3112, Screw Terminals, Module Face Size (45x45)mm |
|
10 |
|
Double Switched Powerpoint, 15 Amp, 240 Volt AC, 2-Pole 3-Wire Grounding (2P+E), Color: white, Plate Size (70x114)mm |
|
10 |
|
Double Switched Powerpoint, 10 Amp, 240 Volt AC, 2-Pole 3-Wire Grounding (2P+E), Color: white, Plate Size (70x114)mm |
|
40 |
|
Single Switched Powerpoint, 15A, 240Vac, White, Plate Size (70x114)mm |
|
38 |
|
Single Switched Powerpoint, 20A, 240Vac, White, Plate Size (70x114)mm |
|
16 |
|
Single Switched Powerpoint, 32A, 240Vac, White, Plate Size (70x114)mm |
|
10 |
|
DIN SCHIENEN STECKDOSE 15A 240VAC, SCHALTER + HALTERUNG (35x7.5)mm, AUSTRALIEN/NZ |
|
1 |
|
Single Switched Socket Outlet, 250V, 10A, Double Pole Switched, Australia/New Zealand Standard AS/NZS 3112, Classic Series, Vertical Mounting, Color: White Electric |
|
10 |
|
Power Outlet Strip (Powerboard), with Overload Protection, 4 Socket Outlets, 10 Amp, 240 Volt AC, Nominal Lead Length 1.8m, Color Finish: White |
|
4 |
|
Power Outlet Strip (Powerboard), with Overload Protection, 8 Socket Outlets with 150J Surge Protection, 10 Amp, 240 Volt AC, Nominal Lead Length 1.8m, Color Finish: White |
|
3 |
|
Surface Mounting Combination AS/NZS 3112, 10A, 240V ac, 3 pin flat, 1 pole switch, 1.1kW, IP66, Quick secure 1/4 turn flap, Complete with adaptors for M25 and M20 plain conduit. 2 module size, Blue |
|
5 |
|
Weatherproof Single Socket Outlet (Receptacle), IP53, 15 Amp, 240 Volt AC, 2-Pole 3-Wire Grounding (2P+E), 3-Pins Flat, Surface Mounting, with Flap to cover Outlet, Side Operating Lever for ON/OFF Switch, Padlockable, AQUA Weatherproof Range Powerpoints, Color: Mist Grey (Black Socket) |
|
5 |
|
Double Switched Socket Outlet, 15A, Surface Mounting, Weatherproof, IP53, Mist Grey |
|
23 |
|
Double Surface Mounting Switched Socket Outlet, 15 Amp, 250 Volt AC, Resistant Grey, Weather Protected, Weathershield, IP53 |
|
28 |
|
Double Surface Mounting Switched Socket Outlet, 10 Amp, 250 Volt AC, Resistant Grey, Weather Protected, Weathershield, IP53 |
|
3 |
|
Single Surface Mounting Switched Socket Outlet, 15 Amp, 250 Volt AC, Resistant Grey, Weather Protected, Weathershield, IP54, with Hinge Flap |
|
1 |
|
Electresafe™ Double Powerpoint, White, 10mA tripping, 230V to 240V AC (50Hz), 3 Neons and 10 Amp outlets (Australia/New Zealand), Plate size: (Width 117 x Height 73)mm, Mounting centres: 84mm, For Hospital applications and hazardous environments |
|
1 |
|
Select desired product above to get further informations. Non stock products have a minimum order quantity. |
|
|
|
Specifications and information are nominal and are subject to change without notice.